1.
Experimental Study of Stainless Steel Cladding Layer Corrosion Resistance and Wear Resistance
不锈钢堆焊层抗磨损腐蚀性能的实验研究
2.
The obtained results indicate that the weld deposited coating of boronic stainless steel has better resistance to cavitation eroion,while weld deposited coating of WC ceramics is a better barrier to erosion and abrasion.
结果表明 ,硼不锈钢堆焊层是较好的抗汽蚀材料 ,但抗磨蚀效果不理想 ;
3.
Research for the Mechanism of Microalloyed Carbonitride for the Martensitic Stainless Steel Hard-facing Flux-cored Wire Deposited Metal;
马氏体不锈钢硬面药芯焊丝堆焊层金属碳氮微合金化研究
4.
Cladding Process of Stainless Steel Strip for A508-Ⅲ
A508-Ⅲ钢的不锈钢带极堆焊工艺
5.
New Stainless Steel Heap Welding Technique for Main Steam Valve Sealing Suface
主蒸汽阀门密封面不锈钢堆焊新工艺
6.
Study of Welded Joint Layer of Nb-1Zr Alloy and Stainless Steel;
Nb-1Zr合金与不锈钢焊接结合层的研究
7.
Surfacing on Duplex Stainless Steel Tube-plate of Heat Exchanger and Welding on Tube-port of Heat Exchanging Tube
换热器管板双相不锈钢堆焊及管板与换热管管头焊接
8.
Ultrafine microstructure and wear resistance of high-chromium stainless steel surfacing alloys
高铬不锈钢堆焊合金的超细化显微组织及耐磨性
9.
SAFUREX Double-phase Stainless Steel Bonding Technique
SAFUREX双相不锈钢焊接技术
10.
Welding of Stainless Clad Steel Plate 14Cr1MoR+347H
14Cr1MoR+347H不锈钢复合板焊接
11.
Study on Strip Surfacing Technologies and Mechanical and Property of Surfacing Deposit for 2.25Cr1Mo Steel;
2.25CrlMo钢带极堆焊工艺及堆焊层组织、性能研究
12.
Discussion on procedure for submerged are welding of 316L extra-low-carbon stainless steel
316L超低碳不锈钢埋弧焊焊接工艺探讨
13.
The technology requirements and characteristics of overlay of a refractory steel build-up welding wire are introduced.
介绍了一种热强钢堆焊焊条的堆焊工艺要求、焊层特性。
14.
An Investigation of Phase Transformation Superplastic Diffusion Bonding of Titanium Alloy/Pure Nickel/Stainless Steel;
钛合金/纯镍中间层/不锈钢的相变超塑性扩散焊接研究
15.
Study on Welding Procedure and Interface Behavior of Precoating TIG Welding-Brazing of Aluminum Alloy and Stainless Steel
铝合金/不锈钢预涂层TIG熔钎焊工艺及界面行为研究
16.
Using Intermediate Transition Layer to Bond Al Alloy and Stainless Steel by Diffusion Welding with Two-step Temperature
采用中间过渡层双温扩散焊连接铝合金和不锈钢
17.
MICROSTRUCTURE ANALYSIS OF INTERFACIAL LAYER WITH TUNGSTEN INERT GAS WELDING-BRAZING JOINT OF ALUMINUM ALLOY/STAINLESS STEEL
铝合金/不锈钢钨极氩弧熔-钎焊接头界面层的微观结构分析
18.
Characteristics of precoating TIG welding-brazing joint of aluminum alloy to stainless steel
铝合金/不锈钢预涂层钨极氩弧熔钎焊接头的特性