1.
OPTIMIZATION OF THE METHOD OF SELEGTING THE TOOTH NUMBER SERIES IN A SET OF CHANGE GEARS Part Ⅲ: Methods for further minimizing the number of reserved change gears--by retarding the speed in two succeeding steps or alternatively
变换齿轮选配最优化——第三报:两级调速和一、二级混合调速
2.
change gear box
交换齿轮箱，变速齿轮箱，挂轮箱
3.
pick - off gear
选速装置, 可互换齿轮
4.
"Gears operate in pairs, the teeth of one engaging the teeth of a second, to transmit and modify rotary motion and torque."
齿轮成对运转,无滑动地传递并改变旋转运动和转矩,一个齿轮的齿与配对齿轮的齿啮合。
5.
Use the Equidistant Alternating Theory to Calculate the Approximate Equation of Gear Tooth Profile about Spiral Bevel Gear;
计算螺旋锥齿轮近似齿廓方程等距变换法
6.
Design Optimization of Weft Set Change Gears in Loom Type 1511M
1511型织机纬密变换齿轮优化设计
7.
The Fault Diagnosis of Gearbox Base on Hilbert-Huang Transform
基于Hilbert-Huang变换的齿轮箱故障诊断
8.
Wavelet Transformation's Application in Gear Box Fault Diagnosis
小波变换在齿轮箱故障诊断中的应用
9.
Calculation of Contact Stress and Selection of Addendum Modification of Plastic Gears
塑料齿轮齿面接触应力计算及其变位系数选择
10.
When the next set of gears are used, the car picks up speed. Finally, when the car is moving easily, the gears are shifted again. We say then that the car is in the high gear.
然后第二组齿轮使汽车加速。当汽车轻快地行驶时，齿轮又变换了，这时汽车使用的是高速齿轮。
11.
gear, reversing or reduction, for steam turbines
汽轮机换向齿轮或减速齿轮
12.
long addendum gear
长齿顶齿轮;径向正变位齿轮;径向正变位齿轮
13.
Select the gear operator and drive bushing from the table for gear operators and options for butterfly valves on page 28.
从第28页的齿轮操作机构和蝶阀选配件表格中，选择齿轮操作机构和驱动套管。
14.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
15.
The act or technique of providing with gears.
齿轮连接，啮合配备齿轮的动作或技巧
16.
Research on the Electrical Seal Chart Being Used for the Modification Coefficient s Selecting of the Modified Gear;
用于选取齿轮变位系数的电子封闭图的研究
17.
A mechanism for changing from one gear to another in a transmission.
变速器，换档装置在一传送过程中从一个齿轮变到另一个齿轮的一种机械装置
18.
Modification Coefficient Selection of the Involute Internal Gear with Zero-tooth-difference Mechanism and Machining Method;
零齿差内啮合齿轮副变位系数的选择及加工方法研究