1.
Cold modeling experiment of 100 t LF bottom blowing process optimization and its application
100t LF底吹工艺优化冷态模拟及应用
2.
Lead smelting technology and the development of oxygen bottom blowing melting process
铅冶技术的发展及氧气底吹熔炼工艺
3.
120 tons of converter are equivalent to the bottom compound blowing technology in applying
120t转炉顶底复合吹炼工艺技术应用
4.
The experiments suggest that both bottom and bottom side argon blowing techniques provide better metallurgical effects than top blowing process, obtaining steel quality satisfactory to continuous casting requirements.
结果表明，底侧吹氩和底吹氩工艺的冶金效果均优于顶吹氩工艺，钢水质量均能满足连铸要求。
5.
Comparative experiments were conducted to investigate the metallurgical, effects of top, bottom side and bottom argon blowing techniques.
为考察顶吹氩、侧吹氩及底吹氩的冶金效果，分别进行了三种吹氩工艺的对比试验。
6.
Practice on lining protection of the Top and Bottom Combined Blown Converter in the No.2 Steelmaking Plant of Angang
鞍钢二炼钢顶底复吹转炉护炉工艺实践
7.
Developments of top-blown copper converting technology in Houma smelter
侯马冶炼厂铜顶吹吹炼工艺的技术进展
8.
In the injection stretch blow moulding process, injection moulding machine is used to make the preform.
注拉吹工艺先用注塑机注出瓶坯。
9.
Hydraulical Model on Slag Splashing for BOF
顶吹转炉溅渣工艺水力学模型的研究
10.
Research of Refining Process of 7075Al Alloys by Spinning Rotor Degassing;
7075铝合金旋转喷吹精炼工艺的研究
11.
Practice of 100 Ton Top-bottom Combined Blowing Converters Process at An-Steel
鞍钢100t复吹转炉生产工艺实践
12.
RESEARCH ON THE DEPHOSPHORIZATION OF REFINING PIPELINE STEEL X65 IN COMBINED BLOWING CONVERTER
复吹转炉冶炼X65管线钢脱磷工艺研究
13.
Improved Production Practice of No.6 Blast Furnace Injection Technlolgy of BX STEEL
本钢6号高炉喷吹工艺改进生产实践
14.
Blows escapes-Anaerobic Digestion Method to Treat Breeding Farm Wastewater
吹脱-厌氧消化工艺处理养殖场废水
15.
If the process of injection stretch and blow moulding are performed within one machine, the process is called one-stage.
在一台机内完成注、拉、吹工序的工艺叫一步法。
16.
ARGUMENTATION OF BLOWING PROCESS PLAN FOR 300kt/a EXPANSION PROJECT IN JINRONG COPPER;
金隆公司300kt/a扩改工程吹炼工艺方案的论证
17.
Bow-blowing Technology and Benefit Analysis of the Self-propelled Trailing Suction Hopper Dredger
自航耙吸式挖泥船艏吹施工工艺及效益分析
18.
The Fabrication of the Diffractive Optics with a Spherical Surface;
曲面基底衍射光学元件加工工艺研究