1.
It was found that the initial fatigue crack nucleated at the cross edge of the hole and surfaces of the specimen by sliding.
试验结果表明 ,疲劳裂纹以滑移方式在孔壁与试样表面相交的棱上萌生 ;
2.
Research on Anti-Sliding Design of Gravity Retaining Wall Wharf with Pipe Pile Foundation
管桩基础的重力式码头挡墙抗滑移计算方法
3.
The Relationship between Speed Skating Leg Stretching Techniques and the Focus of Movement
速度滑冰蹬伸技术与重心移动方式之间的关系
4.
mobile lubricant reclamation system
移动式润滑油更换设备
5.
Least squares polynomial smoothing was constantly used in X ray diffraction test.
X射线衍射线常用多项式拟合移动平滑方法进行处理。
6.
Relation between the Push Technique and the Centroid Moving Track in the Curve;
弯道滑行支撑腿蹬伸技术与重心移动方式之间的关系
7.
testing method for seam slippage of woven fabrics : maximum seam opening method
机织物中纱线抗滑移性测定方法：最大滑移法
8.
To behave in a playful or comical manner.
以滑稽，玩笑的方式行动
9.
rhegmatic pattern
区域性走向滑移断裂模式
10.
An APPlication of the {110} Slip-system Pyramid in BCC Crystals to Determining Independent Slip-systems
体心立方晶体{110}滑移系棱锥在确定独立滑移系时的应用
11.
Change direction by moving body weight from uphill ski to downhill ske, adjusting weight from uphill edge to downhill edge on both skis.
犁式转弯：依靠身体重心向一侧板移动或加大一侧雪板的蹬雪力量来改变滑行方向。
12.
When the belts have been located in the belt pulley grooves,moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.
在安装新皮带时，要用手动的方式使电机向驱动轴移动而使所有皮带均处于滑轮槽内。
13.
test method for resistance to slippage of yarns in woven fabrics using a standard seam
棉织物中纱线抗滑移性测定方法
14.
Differential equation of flow through porous media with slip-boundary condition
滑移边界条件下的渗流基本微分方程
15.
translation gliding
平移滑动, 直移滑动
16.
Glidescope Orbit Design Based on the Differential Equation Approach in Near-Range Autonomous Rendezvous Mission
基于微分方程法的近程交会滑移轨道设计方法
17.
A Study On LPM Movable High Efficiency Industrial Lube Oil Purification Unit
LPM移动式高效工业润滑油净化装置研究
18.
Vibrations and Control in a Moving Flexible Robot Arm with Variable Sections
柔性变截面滑移式机器人手臂的动力学与控制