1.
Popularization and Application of Thickening Torque Nut in the Coal Road Full Bolding
加厚型扭矩螺母在煤巷全锚杆巷道的推广使用
2.
all-metal prevailing torque type nuts
金属预置扭矩式螺帽
3.
a hand tool that is used to hold or twist a nut or bolt.
用来上紧或扭螺母或螺栓的手工具。
4.
Torque Test of Thread Fastener for Automotive Braking Pipe Line
汽车制动管路螺纹紧固件的扭矩试验
5.
NC machining nut with large lead and 3-start rectangular thread
大导程三头矩形螺纹螺母的数控加工
6.
1~10mm Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
GB/T3098.13-1996紧固件机械性能螺栓与螺钉的扭矩试验和破坏扭矩公称直径
7.
Comparison Between Torque Method and Angle Method in Bolt Assembly Technology
螺栓装配技术中扭矩法与转角法比较研究
8.
Study on factors to influence torque strength of anaerobic thread-locking adhesives for automobiles
汽车用厌氧螺纹锁固胶扭矩的影响因素研究
9.
static torque calibuation stand
转矩[扭矩] 静校台
10.
Measurement and Study on Screw Torque and Axial Thrust of Twin Screw Pulping Extruder
双螺杆磨浆机螺杆扭矩和轴向推力的测量与研究
11.
Replace body bolts and torque evenly to70 ft./ lbs.
重新放置阀体螺栓，并且用70英尺/的扭矩均匀的旋紧。
12.
Replace body bolts and torque evenly to 70 ft./lbs.
重新放置阀体螺栓，并且用70英尺/磅的扭矩均匀的旋紧。
13.
Torque-Add-Angle Control Approach Study for Bolt-Joints of Automotive Key Components;
汽车关键零部件螺纹联接的扭矩加转角控制方法研究
14.
Analysis and Research on Fixed Torque Bolt Joint Function Based on RE;
基于反求工程的定扭矩螺栓联接功能分析与研究
15.
Regression Analysis of Relationship Between Axial Force and Torque of High-strength Bolt Connecting Steel Structure for Boiler Based on Experiment Data
基于试验数据的锅炉钢结构高强度螺栓轴力与扭矩关系回归分析
16.
Impact Analysis of Make-up Torque of Drill Connecting Thread Based on 3-D Finite Element Model
基于三维有限元模型的钻具连接螺纹上扣扭矩影响分析
17.
The state of being twisted into a spiral;torsional stress or strain.
螺旋状，扭力扭成螺旋状；扭转的压力或张力
18.
After proper operation has been verified, tighten all bolts using the crossover method. Recommended tightening torques pattern is listed below.
在检验操作能够正常进行后，在采用交叉法紧固所有螺栓。推荐的紧固扭矩模式如下所示。