1.
The welding res etter especially for the big-size,complicated and demanding products.
针对焊接面积大而复杂,焊接要求高的产品，焊接效果优越。
2.
The Research of Single Face Welding-Double Face Forming Automatic Welding Equipment;
单面焊双面成形自动焊接设备的研制
3.
The bars were welded to the deck plate.
扁钢焊接在桥面钣上。
4.
Automatical EB Welding of Curved Weldment
工件平面曲线焊缝的电子束自动焊接
5.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
6.
Research on Welding Characteristics of EH36 Steel by Using Double-Sided Arc Welding
EH36钢厚板双面双弧立焊焊接特性研究
7.
3. Apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
3. 在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
8.
apply flux to outside of tube and inside of solder cup. Surfaces to be joined must be completely covered. Use flux sparingly.
在管道的外面和焊接罩的内部涂上焊剂,焊剂必须完全覆盖焊接表面。请有节制地使用焊剂。
9.
Plasma-arc welding (PAW) may be used for hard surfacing, overlaying and fully automatic butt welding.
等离子弧焊可用于敷焊硬合金表面、堆焊和全自动对接焊。
10.
Forming Process Research on Joint Vertical Welding from Single-face to Double-face of Low-alloy Steel Plate
低合金钢板对接立焊单面焊双面成形工艺研究
11.
Application of Single-Welding-Shaping-Two-Sides Technology in Welding of Tanker Metal Tank
单面焊双面成型工艺在罐体焊接中的应用
12.
A substance applied to a surface to be joined by welding, soldering, or brazing to facilitate the flowing of solder and prevent formation of oxides.
焊剂施于熔接或焊接以防止氧化、促进焊面结合的物质
13.
Surface Nanocrystallization of Pipeline Steel X80 Welded Joints
X80管线钢焊接接头表面自身纳米化
14.
nozzle for gas-operated blowippe welding and surface-tempering machines
气动熔焊机器、焊接和表面回火机器用喷嘴
15.
Welding Technique of Automatical Hidden Arc Overlay Welding for Matching Surface Between Bell and Hopper of Blast Furnace
高炉料钟、料斗配合表面自动埋弧堆焊焊接工艺
16.
Microstructure investigation for the interface of electric resistance welded Cu/Al thin walled tube
薄壁铜铝管电阻焊焊接界面的微观结构研究
17.
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
18.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接，使复层侧的焊缝与背衬板表面齐平。