1.
There are many methods to measure the circular curved line in circuitry construction survey. Angle offset method and tangent offset method are usually used.
在线路施工测量中,圆曲线测设方法有很多,通常采用偏角法或切线支距法。
2.
tangential position roentgenography of mandibular ramus
下颌升支切线位投照术
3.
Branch-and-Cut Algorithms and a Branch-and-Cut Algorithm for Blocked TSP;
分支—切割法与分块TSP的分支—切割法
4.
The lateral vertical cut should be 4 mm lateral to midline.
两侧的垂直切口各距离中线约 4mm。
5.
An experimental study of truss cable support in cross roadway with big span in Xinsan Mine
新三矿大跨距切眼桁架锚索支护试验研究
6.
Draw two tangents to the two branches of the curve.
画出该曲线两个分支的两条切线。
7.
Study on Arithmetic of PCB Images Inspection of Circuitry Width & the Distance between Circuitry
PCB图像线宽线距缺陷检测算法研究
8.
cut-signal-branch operation
切断信号支路运用法
9.
On Some Fixed Value Theorems of Directed Distance for Conic Sections
二次曲线外切多角形中有向距离的定值定理
10.
Effect of dual-wire distance and wire diameter on transverse impedance measurement using dual-wire method
双线法测量横向阻抗中双线间距及线径的影响
11.
In this paper, the concept of highway measure traverse line is introduced and a new offset method based on measure traverse line is brought forward.
该文介绍了公路测量导线的概念,提出了一种以公路测量导线为基线的支距法进行公路中桩放样。
12.
Development Machine of Tool and Machining Method for Rotated Conicoid Using Normal Equidistance Method;
二次旋转曲面法线等距离线加工法及机床研制
13.
right-angle traverse shaving
切线方向进刀剃齿法
14.
Sound-velocity-compensation Based on Searching for the Crosspoint of Equidistant Line and Equal Path Different Line
基于寻找等距线和等距差线交点法InSAS测深系统声速补偿技术
15.
Research on the Offsetting for Triangular Meshes and Curves on Them;
三角网格面及其上曲线等距方法研究
16.
Research on Geodesic Offset for Curves on Triangular Mesh;
组合曲面上组合曲线的等距方法研究
17.
IEEE COMTRADE BASED FAULT LOCATION SYSTEM WITH MULTI-ALGORITHMS FOR TRANSMISSION LINE;
基于多算法的输电线路故障测距系统
18.
Establishment Method of Longer Laboratory Baselines for Verificating EDMs
光电测距仪室内长基线建立方法研究