1.
TRANSMISSION SWITCH AND PLUG LOCATIONS
变速箱开关与注油塞位置
2.
REPLACE THE TRANSMISSION PRNDL SWITCH.
更换变速箱ＰＲＮＤＬ开关。＊
3.
wheel -speed regulating change box
轮变速箱，砂轮变速箱
4.
Can the engine and the gearbox be supplied separately?
发动机和变速箱能分开供应吗?
5.
DISCONNECT THE TRANS RANGE SENSOR (TRS) CONNECTOR.
断开变速箱范围感知器（ＴＲＳ）接头。＊＊
6.
This is the reference for the CAD development of the vehicle gear box.
供车辆变速箱cad软件开发时参考。
7.
Research and Develop about Signal Collecting and Control System of Experiment Stand of Transmissions;
变速箱试验台测控系统的研制与开发
8.
jettisonable gear
紧急开关(可将燃料从油箱中快速放出)
9.
Install transmission and Transfer Case.
安装变速箱和传动箱
10.
Gearbox is the key components in the automobile, and the casing is key part in the gearbox.
汽车变速器是汽车的关健部件，而变速箱壳体又是变速箱中的关键零件。
11.
If vehicle is equipped with automatic transmission install shifter interlock cablRefer to Group 21 Transmission and Transfer Case for procedure.
如果车辆装备了自动变速箱，安装变档互锁电缆。有关程序请参阅单元21之变速箱和加力箱。
12.
KEY OFDISCONNECT TRANSMISSION CONTROL MODULE.
关闭。拆开变速控制模组。＊＊
13.
REPLACE THE AUTOSTICK SWITCH.
更换自动变速开关。＊
14.
TRANSMISSIO IN-LINE 8-WAY CONNECTOR (TRANS SIDE)
变速箱线路内部８—路接头（变速箱侧）
15.
Developing of Rear Bridge Transmission Case Sieries
北汽福田后桥变速箱壳体系列产品开发
16.
Research and Development of Gearbox Assembling Produce Line Based on Rule;
基于规则的变速箱装配生产线MES的研究与开发
17.
change gear box
交换齿轮箱，变速齿轮箱，挂轮箱
18.
Research on Relations of Furnace Windbox Pressure, Damper Position and Secondary Air Velocity
炉膛风箱压力、风门开度和二次风速的关系研究