1.
Structure Analysis and Material Technology Study of ICE Crankshaft Seal
内燃机曲轴密封的结构分析和材料工艺研究
2.
"Supported Shaft Seal: Bonding of elastomer to phenolic backing ring protects against distortion, a common cause of shaft leakage."
支撑性轴密封:弹性材料与酚醛背衬环的紧密结合体,有效防止由于扭曲变形导致的轴泄漏。
3.
Install new front crankshaft oil seal.
安装新的前曲轴油封。
4.
Remove and discard the front crankshaft oil seal.
拆下并抛弃曲轴前油封。
5.
An Improved Design on Seal Groove and Seal Ring of Spherical Plain Bearing
关节轴承密封槽及密封圈的设计改进
6.
axial double mechanical seal
轴向双端面机械密封
7.
fully sealed & self-lubricated bearing
全密封自动润滑轴承
8.
pressure balanced bearing seal
压力平衡式轴承密封
9.
non-contact sealed ball bearing
非接触式密封球轴承
10.
labyrinth gland
迂回[曲折, 迷宫式]密封盖
11.
Research on Assembly Reliability and Sealing Properties of the Bearing Sealed Ring;
轴承密封件安装稳定性与密封特性研究
12.
Analysis of Seal Rings Nonlinear Distortion and Seal Capability of Bearing;
密封件非线性变形与轴承密封性能研究
13.
The Study of Dynamic Seal Structure and Seal Force of Principal Axis with Inside Spray Fluid
内喷流体的动密封主轴结构和密封力研究
14.
The bottom bearing applies both labyrinth seal and frame seal, which have good performance of sealing. The main shaft is anticorrosive.
下轴承端盖密封采用双重密封，可确保密封效果，主轴采用防腐新技术，能保护主轴免受腐蚀。
15.
"There are holes under the reed valve that connect to the engine carburetor. When the piston is moving up, a partial vacuum is produced in the sealed crankcase.
在片簧阀的下面有孔道与化油器相连。当活塞向上运行时,就会在密封的曲轴箱里产生部分真空。
16.
Sealed type bearings are mudproof, dustproof, and leakproof(grease) without the use of shaft seals.
密封型轴承具有防泥、防尘、防漏（脂）性能，无需使用轴密封。
17.
Shaft Weather Seal: (Below bushing on some models.)
轴保护密封:(在某些型号上,轴保护密封位于衬套下方。)
18.
Kiln head seal person who adopts clamshell seal, kiln tail equips with the contact-type sealinstallation of the axial, have guaranteed sealed dependability.
窑头密封采用了壳罩式密封，窑尾装有轴向接触式密封装置，保证了密封的可靠性。