1.
counter crankshaft rotation
反曲轴转动方向的转动
2.
"The starter changes the electrical current into the mechanical energy to push the crank-shaft round.By means of this, the engine can be started."
起动电机把电流转换为机械能,驱动曲轴转动,并带动发动机运转。
3.
The crankshaft is thus made to rotate; the rotary motion is carried through the power train to the car wheels so that they rotate and the car moves.
曲轴转动,动力传动系统将发动机的转动运动传给汽车车轮,从而使车轮及整车转动起来。
4.
The fifth is starting system and its purpose is to change the electrical current into the mechanical energy to push the crankshaft around.
发动机的第五个系统是起动系统，起动系统的作用是把电能转变为机械能推动曲轴转动。
5.
A shaft that turns or is turned by a crank.
机轴用曲柄来转动的轴
6.
As the crankshaft rotates, the crankpin swings in a circle around the shaft.
随着曲轴的转动，曲柄销绕主轴作圆周摆动。
7.
Analysis and Control on Engine Cranktrain Torsional Vibration;
汽车发动机曲轴扭转振动分析及控制
8.
Torsional vibration of crankshaft systems--Measurement and evaluation method
GB/T15371-1994曲轴轴系扭转振动的测量与评定方法
9.
Engine crank tachometer provide VTEC control function.
发动机曲轴转数表提供VTEC控制功能。
10.
Analysis on torsional vibration of crankshaft train based on EXCITE
基于EXCITE的曲轴系统扭转振动分析
11.
A camshaft driven by a chain or belt turns in the same direction as the crankshaft.
凸轮轴被链或者带驱动，使其朝着曲轴相同的方向转动。
12.
But a camshaft driven directly by the crankshaft gear turns in the opposite direction.
但是凸轮轴被曲轴齿轮直接驱动，其将在相反方向上转动。
13.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
14.
Recovering the Geometry of Single Axis Motions by Conic Fitting;
基于二次曲线的单轴旋转运动分析和三维重建
15.
The Fault Diagnostic Studies of Internal Combustion Engine Based on the Analysis of Crankshaft Speed Variation;
基于曲轴转速波动分析的内燃机故障诊断研究
16.
The cap and rod have bearings which permit the crankpin to rotate freely within the rod.
轴瓦盖和连杆中有轴瓦，它允许连杆内的曲柄锁自由地转动。
17.
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
18.
The camshaft rotates in phase with the crankshaft, but at half its speed.
凸轮轴和曲轴协调旋转, 但速度仅是曲轴的一半。