1.
They are made up of high tensile wires and are normally vertical. The deck is usually orthotropic with stiffened steel plateribs or troughs, floor beams, etc.
桥面一般是由加劲钢板肋或槽形板，桥面梁等组成的正交异性板。
2.
starting sheet cells
始极槽,种板槽,始板槽
3.
A rectangular groove cut into a board so that a like piece may be fitted into it.
开榫槽把木板切割成长方形的凹槽，以便相似的板能被放进去
4.
a rectangular groove cut into a board so that another piece can fit into it.
能够使得另一个板插进去的板上的一个矩形槽。
5.
Design and manufacturing and performance analysis of rectangular micro-groove heat pipe
微矩形槽平板热管的设计制造及性能分析
6.
The numerical simulation on heat transfer performance of rectangular micro channel plate heat pipe
微小型矩形槽道平板热管传热性能的数值模拟
7.
Advantage of Using Arched-type Sheet in Items of Altering from Level to Slope Roof
薄钢拱形槽板用于“平改坡”项目上的优势
8.
Biomechanical Experimental Research on the Compression Plate of Gear Contact Plate-band and Channel Type for Femoral Fractures;
齿接触板-带式槽形加压钢板固定股骨骨折的生物力学实验研究
9.
This then allows the lower plate lug to make contact of its two corners with the slanting walls of "V" groove.
这便于下面的极板年的两角与“V”字形沟槽的两个倾斜的壁相接触。
10.
Local and Distortional Buckling Analysis of Cold-Formed Lipped-Channel with V-Stiffened Web under Axial Compression Force;
腹板V形加劲的冷弯卷边槽钢轴压下局部和畸变屈曲分析
11.
Influences of Anchor System on Web Stress of Multi-Span Continuous Steel Tub-Girders During Hauling Construction
拖拉施工锚固系统对多跨连续槽形钢梁腹板局部受力的影响
12.
A groove inside the end of a barrel or cask into which the head is set.
桶板槽一种刻在木桶边板两端装端板用的槽
13.
slot the edge of the panel into the groove
把嵌板的边插进槽里
14.
multi-functional slitting machine for corrugated paperboard
多功能瓦楞纸板切槽机
15.
a ledge for chalk beneath the blackboard
黑板下方的粉笔槽.
16.
The carpenter grooved the board.
木匠在木板上开槽。
17.
For flat products like plate and strip, plain rolls are used, and grooved rolls are used for the rolling of sections of various shapes.
平轧辊用于轧制扁平产品，如板材和带材，而轧制不同形状断面的产品则要用有槽轧辊。
18.
Optional mounting configurations (clamp, flange, plate) and tank sealing solutions (packed, mechanical, lip) are available upon request.
可提供多种安装结构（卡盘式，法兰式，板式）和槽罐密封形式（填料密封，机械密封，油密封）。