1.
The portions of the crack near the saw cut and along the edges are closed in relation to the center of the crack face.
接近锯切口和沿着边缘的裂纹部分相对于裂纹面中心而肯定是闭合的。
2.
After cutting, shear section shall be checked for no lamination and shear crack.
切割后，应检验切割部分有无夹层，切割裂纹。
3.
Cause of Corner Crack of Continuous Cast Billet in Laiwu Steel No.5 Continuous Casting
莱钢5号连铸机连铸坯角部裂纹成因分析
4.
Numerical Analysis of Transversal Crack on Slab Corner in Straightening During Continuous Casting
连铸矫直过程板坯角部横向裂纹数值分析
5.
Observation and Analysis of Coronary Cracks Beneath the Crater in Armor-plate
装甲板弹坑底部冠状裂纹的观测与分析
6.
Finite Element Analyses of Stress Intensity Factors of Cracks at V-Notches
V型缺口根部裂纹应力强度因子的有限元分析
7.
Elastic-Plastic Fracture Analysis for Internal Axial Surface Half Elliptical Cracks in Oil & Gas Pipeline
油气管道内部轴向表面半椭圆裂纹弹塑性断裂分析
8.
ON THE FORMATION MECHANISM OF INTERNAL AND SURFACE CRACKS OF CONTINUOUSLY CAST SIABS
连铸板坯内部裂纹和表面裂纹的形成机理
9.
Crack Analysis in Heat Treatment of Cr12MoV Convex Mold;
Cr12MoV凸模热处理裂纹分析
10.
Transverse crack analysis of SWRH 82B wire rod drawing
SWRH82B盘条拉拔横裂纹分析
11.
All existing web cracks were arrested by drilling 19 mm holes at the ends of the cracks.
所有已存在的腹板裂纹都在裂纹端部钻19mm的孔止裂。
12.
Detailed siress analysis was carried out for a section of the pipeline including an eccentric reducer on which long cracks appeared twice.
进而对曾两次出现长裂纹的偏心异径管管段进行细部应力分析。
13.
A segment of the box corner was removed with a hole saw in order to permit an examination of the crack.
为了对裂纹进行检查，用圆孔锯从箱型断面拐角处锯下一部分。
14.
Elastic-Plastic Finite Element Analysis for Unequal-Diameter Tee Joint with Axial Through-wall Cracks at the Shoulder
焊制异径三通肩部轴向穿透裂纹弹塑性有限元分析
15.
STUDY ON HEAT AND MASS TRANSFER INSIDE RICE AND MECHANISM OF RICE FISSURING USING FINITE ELEMENT METHOD;
水稻内部传热传质有限单元分析和应力裂纹机理研究
16.
Analysis of Crack Healing in Hot Rolled Deformed Piece
热轧变形轧件内部裂纹愈合实验研究和机理分析
17.
Relationship between stress distribution along slant crack and opening displacement on crack-surface
倾斜裂纹的应力分布与裂纹面开口位移的关系
18.
Fracture Analysis of Piezoelectric Materials with Centric Cracks
中心裂纹压电材料板的断裂问题分析