1.
openings for connections to brazed vessels
用于对钎焊容器的连接开孔
2.
Research on PdNb Alloy Brazing Material Used for Cathode Welding of Vacuum Electron Devices
真空电子器件阴极焊接用PdNb合金钎焊料的研制
3.
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
4.
This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.
介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。
5.
Vacuum Brazing of 42CrMo Steel and YG8 Hard Alloy
YG8硬质合金与42CrMo钢的真空钎焊连接
6.
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
7.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比
8.
Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal
Cr对Ni-P系钎料钎焊不锈钢接头性能的影响
9.
CO_2 laser brazing galvanized steel sheets with different spot modes
不同光斑模式的CO_2激光在镀锌板钎焊连接中的应用
10.
The Brazing Technics of the EGR Cooler and the Study on the Corrosion Resistance of the Brazed Joint;
废气再循环（EGR）冷却器的钎焊工艺及钎焊接头的耐腐蚀性研究
11.
Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.
在高温环境下,铜也表现很好,而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。
12.
A Study of Brazing Process and Mechanism of Si_3N_4 Ceramic Using High-Temperature Filler Alloy;
高温钎料钎焊氮化硅陶瓷的连接工艺及机理研究
13.
Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy
钎焊温度对镍基合金真空钎焊接头组织及硬度的影响
14.
Influence of Cu on Properties of Zn-Al Solders for Al/Cu Brazing
Cu元素对铝/铜钎焊用Zn-Al钎料性能的影响
15.
Inner hole weld" was a new process for the adjacent of tube to tube-sheet of pressure vessels.
内孔焊”工艺是压力容器中管与管板连接所采用的一种新兴工艺。
16.
YS Automatic Girth Welder (YS-AGW-I/II) is mainly used in horizontal girth inside / outside welding of large tanks、vessel etc. The welder applies submerged arc welding.
型埋弧自动横焊机采用埋弧横向焊接工艺，主要用于大型储罐、容器等内外环缝的焊接.
17.
holes in joints of welded vessels
焊接容器接头处的孔
18.
Joining Strength and Microstructure of Sintered SiC/SiC Joints Prepared by Active Brazing Process
活性钎焊法连接碳化硅陶瓷的连接强度和微观结构