1.
The friction being great, we have to take precautions to prevent these parts from wearing down too fast.
由于摩擦力很大，我们必须采取预防措施，防止机器部件磨损过速。
2.
Dynamic Analysis and Failure Mechanism Research of the Reciprocating Machinery Parts with Wearing
往复式机械设备零部件磨损的动力学特性及故障机理研究
3.
Inspect and replace worn or damaged parts as necessary.
检查并且更换需要更换的磨损或损坏的部件。
4.
Some of the parts are scrapped because ofworn tooling, bad equipment, or human error.
由于工具磨损，设备损坏或人为错误而报废了一部分零件。
5.
Under the condition of boundary lubrication,adhere wear mechanism and abrasive grain wear mechanism do the business at the same time.
在边界润滑条件下,镀层的磨损机制为粘着磨损与磨粒磨损并存.
6.
We allow for wear through friction in designing the parts of every machine.
我们设计每台机器的部件时，都考虑磨擦造成的损耗。
7.
When two metal parts move over each other, they will wear away rapidly.
当二个金属部件互在其上运动时它们将迅速地磨损。
8.
Numerical Simulation of the Sandy Ablation of Centrifugal Pump Impeller Flowed Passage Parts in High Sandy Flow;
含沙水流中离心式水泵过流部件泥沙磨损的数值模拟
9.
Analysis of wear and tear in filling idler wheel valve components in Guigang hub
贵港枢纽船闸充泄水阀门滚轮部件的异常磨损与分析
10.
Several Common Wear Categories of Machine Parts with Lubricant and the Reasons
使用润滑剂机械部件间的几种常见磨损类型及起因
11.
The housing has hydraulically-actuated hinged sections front and rear which provide for easy access to the internals and the wear parts.
设备壳体的前部和后部设有铰接的液压开启部分，能提供方便到达内件和磨损件的位置。
12.
If the washing machine tubs were chipped or damaged, then the abrasive damage to the cuff edge was greatly increased.
当洗衣机桶部破损时，袖口的磨损增大。
13.
Open the door of the enclosure and inspect the internal components and wiring for any signs of frayed or loose wires or other visible damage.
打开外壳门,检查内部元件和线路是否有磨损的痕迹、线路是否松开,或其它可见的损坏。
14.
3. Open the door of the enclosure and inspect the internal components and wiring for any signs of frayed or loose wires or other visible damage.
3、打开外壳门,检查内部元件和线路是否有磨损的痕迹、线路是否松开,或其它可见的损坏。
15.
Research on Accelerated Wear Mechanism for 3Cr13 Sprayed Coating Under Abrasive Particles Lubrication
含磨粒润滑条件下3Cr13涂层加速磨损机理研究
16.
Failure analysis of chute abrasion in scraper conveyor and anti-wear measures
刮板输送机中部槽磨损失效分析与抗磨措施
17.
Under high stress or low stress abrasion working conditions, high Cr white cast iron can be used just after it having been air quenched.
高应力磨料磨损或低应力磨料磨损工况条件下,高铬白口铸铁空淬后不须回火可直接应用。
18.
Thousands of installations demonstrate the reliability and suitability of these simple and effective tools for sand production.
本机具有可更换磨损件，厚壁管和轴，带隔离结构下部轴承和特重负荷齿轮箱。