1.
The Front/Reverse switching mechanism was placed on the driving shaft, while the acceleration clutch was placed on the driven shaft.
前/后机械开关安装在驱动轴上，同时加速离合器安装在从动轴上。
2.
By placing the clutch on the driven pulley, the pulley can remain spinning even when the car is stopped.
将离合器安装在从动轮上，即使停车时滑轮也能够连续旋转。
3.
Install the upper side gear and clutch disc pack.
安装顶部侧齿轮和离合器片组件。
4.
overload release clutch
过载离合器安全离合器
5.
Install the low pressure cycling clutch switch onto the accumulator fittinSee Low Pressure Cycling Clutch Switch in this group for the procedures.
安装低压循环离合器开关到蓄压器接头上。对于具体程序请参阅本单元中低压循环离合器开关。
6.
The front end of gearbox can be directly connected to engine by clutch or separate enging or assembled apart in left horizontal type(view from the rear of gearbox).
采用左卧式或右卧式安装（从变速器后端向前看），可通过离合器与发动机直接连接或分开安装。
7.
This unit features aluminum alloy construction with the clutch and drive attached back-to-back to save space and make installation easier.
此机种采用铝合金体，离合制动器相背贴，占地空间小易于安装。
8.
clutch operating linkage
离合器操作联动装置
9.
slip friction clutch
安全打滑摩擦离合器
10.
And install clutch safe-device to prevent the damage.
并设有离合安全装置，以防超负荷引起的机器损伤。
11.
Two-Machine Mixed Shop Problem with Setup,Processing and Removal Time Separated
安装、加工和拆卸时间分离的两台机器混合作业问题(英文)
12.
The clutch is a friction-type uncoupling device. It is linked to a clutch pedal in the driver's compartment.
离合器是一种摩擦式分离装置,与驾驶室中离合器踏板相连接。
13.
Careless use of the clutch may damage the gears.
离合器使用不慎可能损坏传动装置.
14.
Study on the Modified Barrier Surfaces of a Modeling Cylindrical Electrorheological Clutch Device;
ER离合器传输模拟装置界面改性研究
15.
If original clutch cover will be reinstalled, mark position of cover on flywheel for assembly referencUse paint or scribe for this purpose.
如果安装原来的离合器盖板，在飞轮上标记盖板的位置，以便于参考。用油漆或划线来完成此工作。
16.
Another type vapor separator is mounted on top of the tank.
另一种类型的蒸气分离器安装在燃油箱的顶部。
17.
single or multiple loudspeaker, unmounted
单一式或复合式扬声器,未安装的
18.
Combined Installation of 600 MW Unit Condenser
某电厂600MW机组凝汽器的组合安装