1.
The Disabled Analysis and Selected of O-shaped Seals in Hydraulic System
液压系统中O形密封件的失效原因分析和选用
2.
It has two stem sealing: one is stuffing box and another is toroidal sealing ring( O-ring).
本阀阀杆密封分为两种形式：一为填料密封；一为O型密封环密封。
3.
Effects of Dimensional Tolerance on Sealing Characteristic of O-ring;
O形橡胶密封圈尺寸公差对密封性能的影响
4.
Finite Element Analysis of Stress and Contact Pressure of Rubber O-sealing Ring with Back-up Ring
O形橡胶密封圈配合挡圈密封的应力与接触压力有限元分析
5.
An O-ring seals the relief valve body to the main housing.
用一个O形环密封安全阀阀体与主外壳。
6.
Study and Design of High Pressure Vessel Based on Rubber O-ring Sealing;
基于O形橡胶圈密封的高压容器设计和研究
7.
Finite Element Analysis of O-Ring with Single Side Gasket
加有单侧挡圈的O形密封圈有限元分析
8.
Analysis of Seal Rings Nonlinear Distortion and Seal Capability of Bearing;
密封件非线性变形与轴承密封性能研究
9.
Finite Element Analysis on Rubber Sealing Y-ring in the Condition of Static Seal
静密封条件下Y形橡胶密封圈有限元分析
10.
" Fluid systems--Sealing devices--O-rings--Inside diameters, cross-sections, tolerances and size identification code"
GB3452.1-1992液压气动用O形橡胶密封圈尺寸系列及公差
11.
Fluid power systems--O-ring--Design criteria for O-ring housing--Basic calculation
GB/T3452.3-1988液压气动用O形橡胶密封圈沟漕尺寸和设计计算
12.
The check valves shall be modular and shall seal to the main valve body by the use of an O-ring.
止回阀应该是模块化，并通过一个O形环密封连接到主阀体上。
13.
O-ring Sealing Research between the Quartz Glass and Platetube in Photocatalytic Reactor;
光催化反应器中石英管与管板O形密封结构机理研究
14.
Finite Element Analysis of the Sealing Performance of O-ring in Pressure Shell for AUVs
水下机器人耐压壳体O形圈密封性能有限元分析
15.
Seal Performance Analysis of O-Ring Between Stainless Steel and Aluminum Alloy
不锈钢与铝合金材料之间密封用O形环性能分析
16.
"On the standard seals, the secondary sealing bellows (flexible elastomer bellows) and the o-ring are Viton material for maximum performance."
在标准的密封上,次密封波纹管(柔软的弹性波纹管)和O形环采用性能最好的氟橡胶材料。
17.
After saturation the specimen is fitted into the lower half of a special cell, being sealed by O-Rings.
试件浸透水后，便装入一个专用的O形封闭环的容器的下半部中。
18.
metal O-ring and nonmetallic O-ring seal
金属-非金属双O型环密封