1.
tap and die set
全套螺丝攻和螺丝板牙
2.
taps dies and tools
螺丝攻、车刀、模具
3.
a tool that is fitted into a diestock and used for cutting male (external) screw threads on screws or bolts or pipes or rods.
装在螺丝攻里用来切割螺丝钉、螺栓、管具或棒类的多余的螺旋的工具。
4.
pepe stock and dies
管子丝攻和螺丝钢板
5.
forming and tapping oils for bolts and nuts formers
螺丝、螺帽成型攻牙专用油
6.
A Comparative Study on the Effect of the Self-tapping and the Nonself-tapping Pedicle Screw;
自攻丝与非自攻丝椎弓根螺钉性能的对比研究
7.
Tapping is the process of cutting a thread inside a hole so that a cap screw or Bolt may be threaded into it.
攻丝是在一个孔中车出螺纹,以便装上有帽螺钉或螺栓。
8.
"Drill & tap for M16X2-1.38 Deep NPT,16 places for cover plate mounting screw"
钻孔,攻出一只M16X2-1.38深NPT螺纹,16处,该螺纹应与盖板固定螺丝配套
9.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
10.
Shear Behaviour Experiment Investigate of Stressed Skin Diaphragms Connected by the Self-Tapping Screws;
自攻螺丝连接受力蒙皮组合体的抗剪性能研究
11.
Insert a self-tapping screw into the drilled pin and carefully pull the pin from the camshaft.
插入自动攻丝螺丝到钻孔的销中，小心地在凸轮轴中拉动销。
12.
tap(ping) drill
螺丝孔钻，螺丝底孔钻
13.
"The radio should be secured to a solid surface, using the mounting bracket and self-tapping screws supplied."
收音机应用安装支架和自攻螺丝固定在坚固的表面上。
14.
Now we mainly produce in the fastener product the screw, the nut, from attack, filling piece, series the and so on ball pad product.
现在我们主要生产紧固件产品中的螺丝、螺母、自攻、平垫、弹垫等系列的产品。
15.
Tapping screws thread
GB/T5280-1985自攻螺钉用螺纹
16.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
17.
hex machine screw nut
机械螺丝用六角螺帽
18.
automotive fasteners
车辆(汽车)螺丝、螺帽