1.
"On the tire with an inner tube, the valve is mounted on the tube. On the tubeless tire, the valve is mounted on the wheel rim."
有内胎式轮胎气门是直接做在内胎上的,无内胎式轮胎的气门安装在轮毂上。
2.
Install the hydraulic valve tappets.
安装液压气门挺杆。
3.
Install the valve locks and release the tool.
安装气门锁，放开工具。
4.
Temperature/Blend-Air Door Motor Remove/Install
温度/混合-空气门马达拆卸/安装
5.
The gas distribution system shall cover from the gas outlets on the benches or fume hoods to gas regulator manifolds at the cylinder area.
气体管路安装从气瓶站总阀门到工作台上各个气体阀门。
6.
Craftwork for Installation of 3000t coffer of intake water of Xiamen gas-fired power plant
厦门燃气电厂取水口工程3000T沉箱安装工艺
7.
Worm transmission, convenient to switch from manual to pneumatic mode, It is installed between operation organ and valve.
蜗杆传动，手动气动切换方便。安装地执行装置与阀门之间。
8.
There shall be semi-auto change over system in the gas yard and main pressure valve and relief valves should be located outside the lab building.
安装半自动转换阀控制气瓶更换，主要的控制阀门和减压阀门都安装在实验室外。
9.
Sometimes the camshaft is fitted directly into the cylinder head and operates on the valves without rockers.
有时，凸轮轴直接安装在气缸盖上并且不用摇臂控制阀门工作。
10.
Manufacturers and installers of PVC door systems, swing doors, fast acting doors.
生产、安装聚氯乙烯门系列，摆门，速动门。
11.
Door Module Remove/Install
车门模组拆卸/安装
12.
Anti-Burglar Door & Aluminum Alloy installation Team
防盗门铝合金安装队
13.
auxiliary power unit bleed valve
辅助动力装置放气活门
14.
When returning cylinders to the supplier, properly close the cylinder valve, replace and secure any valve outlet seals, and properly install the cylinder cap.
钢瓶返还给供应商时，正确关闭钢瓶阀门，替换并固定阀门排气口密封，正确安装钢瓶帽。
15.
"In the other kind of valve mechanism for an engine, the valves are located in the cylinder Block instead of the head."
另一种气门机构的气门是装在气缸体上,而不是装在气缸盖上。
16.
Install nuts attaching the door handle to the door.
安装连接车门手柄至车门的螺帽。
17.
The spy staged a break-in to plant a listening device.
（间谍破门而入，安装窃听装置。）
18.
Install door waterdam and trim panel.
安装车门挡水器和装饰板。