1.
Study on Multistage Cold Precision Forging Process and Die of the Shaft in Gear-box;
轿车变速箱轴类件多工位冷精锻工艺及模具研究
2.
"The overdrive is a mechanism interposed between the transmission and propeller shaft to permit the propeller shaft to turn faster than, or overdrive, the transmission main shaft."
超速档是装在变速箱和传动轴之间的一套机械装置,使传动轴比变速器主轴转的更快。
3.
wheel -speed regulating change box
轮变速箱，砂轮变速箱
4.
Fracture accidents occurred on the second shaft of automobile gearbox during operation.
汽车变速箱二轴在工作中发生多起断裂事故。
5.
Behavior Modeling of Helical Gear Shaft of Gearbox Based on Pro/Engineer
基于Pro/Engineer实现变速箱斜齿轮轴的行为建模
6.
Remove side bearings from differential case.
拆卸差速箱处的侧轴承。
7.
Remove differential case from axle housing.
从轴管上拆卸差速箱。
8.
If the Transmission Control Module, torque converter, or transaxle has been replaced:
如果变速箱控制模组、扭力变换器或传动轴已更换：
9.
Install transmission and Transfer Case.
安装变速箱和传动箱
10.
Remove differential case and dummy bearings from axle housing.
拆卸轴壳内的差速箱和平衡轴承。
11.
The inner spindle protrudesfrom the gear-box and contians a means for mounting various types ofchucks ,face plats ,and dog plates on it .
变速箱中突出的内轴含有接口，可连接各种型号的卡盘，面盘，狗盘。
12.
Research on Assembly Precision of Gearbox Shafting Assembly Based on Dynamic Dimensional Chain
基于动态尺寸链的变速箱总成轴系装配精度的研究
13.
TRANSMISSIO IN-LINE 8-WAY CONNECTOR (TRANS SIDE)
变速箱线路内部８—路接头（变速箱侧）
14.
parallel shaft reducer
平行轴减速器圆柱齿轮减速箱
15.
Remove differential side bearings from differential case.
从差速箱拆卸差速器侧轴承。
16.
change gear box
交换齿轮箱，变速齿轮箱，挂轮箱
17.
Mount the transmission on a transmission jack and secure the transmission with safety chains.
在一个变速箱千斤顶上放置变速箱并用安全带固定变速箱。
18.
FORCE DIFFERENTIAL CASE TO RING GEAR SIDE
把差速箱推进轴壳的主动齿轮侧