1.
Research on Measuring Technology for Taper Thread's Dimensions Based on CCD;
基于CCD的锥螺纹尺寸测量技术的研究
2.
General purpose screw threads for joints on pipe line--Dimensions
GB/T1414-1978管路旋入端用普通螺纹尺寸系列
3.
Install a 14 mm (1/2 inch) (thread size) air hose adaptor in the spark plug hole.
在火星塞孔安装一个14公厘（1/2英寸）（螺纹尺寸）的空气软管适配器。
4.
Miniature screw threads--Limits of sizes
GB/T15054.5-1994小螺纹极限尺寸
5.
Limits of sizes for metric trapezoidal screw threads
GB/T12359-1990梯形螺纹极限尺寸
6.
standard size of screw for rubber extruder
橡胶挤压机的螺纹标准尺寸
7.
Buttress threads with 3 and 30 degrees flank angle-Basic dimensions
GB/T13576.3-1992锯齿形(3°、30°)螺纹基本尺寸
8.
Research on the formation of dimensional chain when thread hob rolls thread by axial intake on doubleroller machine;
双滚柱机床螺纹滚头轴向进给滚压螺纹时形成尺寸链的分析
9.
Dimensions of screw cores made of ferromagnetic oxides
GB/T10192-1988磁性氧化物制成的螺纹磁芯的尺寸
10.
General purpose screw threads-Limits of sizes for commercial bolt and nut threads-Coarse quality
GB/T9146-1988商品紧固件的粗糙级精度普通螺纹极限尺寸
11.
General purpose screw threads-Limits of sizes for commercial bolt and nut threads-Medium quality
GB/T9145-1988商品紧固件的中等精度普通螺纹极限尺寸
12.
Influences of dimensional deviations on contact characteristics of threaded joint with double steps in drill collars
钻铤双台阶螺纹接头尺寸偏差对接触特性的影响
13.
Spiral-welded steel pipe is available in sizes from6 to36 inches.
螺旋焊接钢管的尺寸从六寸到三十六寸。
14.
"When threading pipe, gauge pipe threads for size and length to avoid jamming pipe against seat and disc."
当对管道进行攻丝时,要测定管道螺纹的尺寸和长度,避免将管道塞满阀座和阀瓣。
15.
Threaded-in bonnet is common in lighter-duty services and smaller sizes of bronze multi-turn valves.
螺纹旋进式阀盖通常用于轻型管道系统和小尺寸青铜多回转阀门中。
16.
"The pin gauges are used to measure the whole distance, the pitch diameter of the thread, etc. Especially, they are suitable for curved groove width measurement."
针规适用于机械加工中孔径、孔距、内螺纹小径的测量,特别适于弯曲槽宽及模具尺寸的测量。
17.
Inspection machining dimension of propeller shaft( intermediate shaft or counter shaft).
螺旋桨轴（间轴）加工尺寸检查。
18.
Types and dimensions of edison screw caps
GB1406-1989螺口式灯头的型式和尺寸