1.
spring eye bolt
(弹簧的)环端螺栓，弹簧眼螺丝
2.
Remove rear lower suspension arm bolts.
拆卸后下端悬吊臂螺栓。
3.
square collar-head set-bolt
方头凸缘端紧定螺栓
4.
Install the bolts attaching the end cap to the front fender.
安装连接末端端盖到前挡泥板的螺栓。
5.
Remove upper generator mounting bolt.
拆下上端发电机安置螺栓。
6.
Lock rings at the end of shaft with bolt
GB/T892-1986螺栓紧固轴端挡圈
7.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
8.
Remove vibration damper bolt and washer from end of crankshaft.
从曲轴端拆下减震器螺栓和垫圈。
9.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
10.
Fracture analysis of the liner bolts used for φ5.03 m×6.4 m ball mill
Φ5.03 m×6.4 m球磨机端衬板螺栓断裂分析
11.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。
12.
Remove the lower suspension arm nut and bolt from the axle bracket.
从车轴支架上拆去下端悬吊臂螺帽和螺栓。
13.
Remove the upper engine flywheel/converter housing bolts and loosen the bottom bolts.
卸去上端引擎飞轮/转换器壳体螺栓，并拧松底部螺栓。
14.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
15.
A Study on the Design Method of the Clamping Bolts on the Cable End of Motor Vehicle Winch
汽车绞盘钢丝绳端紧固螺栓设计方法的探讨
16.
Research on Some Issues of Extended End-Plate Beam-to-Column Bolted Connections;
梁柱外伸端板螺栓连接中若干问题研究
17.
Research on the Performance of Steel Channels as Stiffeners in Bolted End-plate Beam-to-column Connections;
槽钢加劲肋在梁柱端板螺栓连接中的性能研究
18.
Extended End-plate Bolted Connections Performance Study of Steel Frame Structure;
钢结构梁柱外伸式端板螺栓连接节点性能研究