1.
Spherical plain bearing rod ends-Boundary dimensions and tolerances
GB/T4222-1991杆端关节轴承外形尺寸和公差
2.
Spherical plain bearing rod ends-Boundary dimensions
GB/T9161-1988杆端关节轴承外形尺寸
3.
Torquing Tie Rod End Attaching Nut
拧紧转向拉杆端接合螺帽
4.
Remover Tie Rod End MB–991113
MB–990635号拉杆端拆卸工具
5.
Tie Rod End To Steering Knuckle Nut
转向拉杆端与转向关节螺栓
6.
Tie Rod End Adjusting Sleeve Nut
转向拉杆端调整轴筒螺栓
7.
The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle
圆杆端部在倾斜压模间的塑性变形力
8.
The end of the bar had been filed down to a point
铁杆的末端被锉成尖状。
9.
steering drag link rear end grease fitting
转向纵拉杆后端油嘴
10.
shoulder dressing tool
钻杆接头端面整形工具
11.
Pull the flag to the top of the pole.
把旗升到旗杆顶端。
12.
Separate the end cap from the bumper.
将末端端盖和保险杆分隔开。
13.
If the end of the link which does vertical translation is connect with the other links.
杆子的尾端连接著另一个杆子，做上下移动。
14.
The only load to be applied to the torsion bar is the torque M at its ends.
扭杆上的唯一载荷是扭杆两端的扭矩M。
15.
Position the end cap on the rear of the retainer and the outer edge of the bumper.
在扣件尾部和保险杆边缘外部定位末端端盖。
16.
Buckling of round variable section compression bars with one side fixed and another place elastic supports
下端固接上端弹性支承变截面压杆的屈曲
17.
disc ,of unhardened gelatin, for sticking billiard-cue tips
软胶制圆片,放在台球杆顶端
18.
locking cam keeper of container end frame
集装箱端架锁凸轮杆插座