1.
"There are three types of coil-spring front suspension. In one, the coil spring is located between the upper and lower control arms, and the lower control arm has one point of attachment to the car frame."
有三种螺旋弹簧前悬挂结构:一,螺旋弹簧安装在上、下控制臂之间,下控制臂的一端与车架相连;
2.
"In the second type, the coil spring is located between the upper and lower control arms, and the lower control arm has two points of attachment to the car frame. "
二,螺旋弹簧安装在上、下控制臂之间,下控制臂有两处与车架相连。
3.
Place the shock absorber with lowering spring under the car。 Place the shock exactly the same as original.
将减震器与运动弹簧安装到车上时，减震器的固定位置与螺丝强度也一定要和原装的相同。
4.
brake spring pliers
安装制动弹簧用手钳
5.
Leaf Spring Remove/Install
叶片弹簧之拆卸、安装
6.
Install rear of spring onto rear spring shacklInstall shackle platDo not tighten.
安装弹簧后端至后弹簧钩环。安装钩环板。不要旋紧。
7.
Install the jounce bumper on the upper spring mount.
在上部弹簧固定处安装避震器。
8.
Later the shock absorber with lowering spring should have to be placed exactly as the original.
因为安装运动弹簧要与安装原装减振器的位置一模一样。
9.
cushion, fitted with springs or stuffed
装弹簧或充填物的靠垫
10.
locomotive and car suspension
机车车辆弹簧悬挂装置
11.
spring hanger bushing replacer
弹簧挂钩衬套换装器
12.
adjustable spring gauge
可调式弹簧定位装置
13.
Install the clock spring, and switches refer to Group 8 Electrical for service procedures.
安装钟表弹簧及开关。有关维修程序，请参阅单元8，电器。
14.
Preferred position for 2300 valves is in a horizontal line with spring chamber up.
对于系列2300阀门，首选的安装位置是在水平管线上，其弹簧隔膜朝上。
15.
system of parts(eg springs and shock absorbers)by which a vehicle is supported on its axles
（车辆的）悬挂装置（如弹簧及减震器）
16.
top-roll spring balance arrangement
上轧辊的弹簧式平衡装置
17.
auxiliary release device for spring-brake actuator
弹簧制动器的辅助放松装置
18.
used to wind a spring-driven device (as a clock).
上弹簧发条的装置通常用于锁。