1.
TURN IGNITION FROM THE OFF POSITION TO THE ON (RUN) POSITION.
把点火开关由关闭位置转到打开（运行）位置。
2.
Wipers Not Parking in the Off Position
雨刷在关闭位置不能停止
3.
The throttle plate moves toward the closed position as rated speed is reached.
当达到发动机额定转速时，节流板趋于关闭位置。
4.
The adjusting of screw prevents the throttle valve from moving to the fully closed position.
调节螺钉防止节气门运动到全关闭位置。
5.
Open-close position indicator. Limit switches for remote indication.
开启-关闭位置指示器。适用于远程指示的限制开关。
6.
Internal stops provide positive over travel protection for power actuated valves and act as a reference to position the discs in the open and closed positions.
内置的止动装置为动力执行机构提供行程保护，并且作为参考坐标在开启和关闭位置定位阀瓣。
7.
in off position
在关闭状态(位置)
8.
Drag the Close button to its window location.
将“关闭”按钮拖到它所在的窗口位置。
9.
To release from a closed or fastened position.
打开从关闭的或固定的位置上移开
10.
Verify the right toe setting and turn off engine.
验证右车轮着地位置设定并关闭引擎。
11.
Close the back cover so that the back cover latch snaps shut and returns t the original position.
关上后盖,使后盖锁迅速关闭,回到原来位置。
12.
Represents a double-pole, single-throw switch. Right-click for open and closed positions.
表示双刀单掷开关。右击指定断开或闭合位置。
13.
Represents a double-pole, single-throw switch. Open and closed positions can be specified.
表示双刀单掷开关。可指定断开和闭合位置。
14.
The valve may be padlocked in full open or full closed position.
可以把阀门锁定在完全开启或完全关闭的位置。
15.
The position of the valves during the power stroke are both closed.
在作功冲程期间，气门的位置都是关闭的。
16.
Valves should be installed with the disc in the closed or almost closed position. This will prevent damage to the disc sealing edge.
安装阀门时,蝶板应该处于关闭或几乎关闭的位置。这是为了防止蝶板密封装置受到损坏。
17.
In the ready position close the face of the racquet and make sure that the racquet stays closed as you turn the shoulders and bring the racquet back.
在预备位置中关闭网拍面,而且确定当你转肩而且带网拍到背后的时候，网拍还停留在关闭状态。
18.
landing door closed detection device
层站门关闭监察装置