1.
Road vehicles--Semi trailer fifth wheel mounting
GB/T13880-1992半挂牵引车牵引座的安装
2.
seat with integral seat belt anchorages
设有原装安全带固定装置的座位
3.
Install screws attaching seat function switch to seat trim panel.
安装连接座椅功能开关至座椅饰板的螺钉。
4.
accessory drive pad
附件传动装置安装座
5.
The lathe should be set on a firm base.
车床应安装在坚实的底座上。
6.
flexible-mounted engine
安装在弹性座垫上的发动机
7.
The frame or chassis on which panels of electrical equipment may be mounted.
可安装电气设备板的框架或底座。
8.
Install the seatback in the vehicle.
在车辆里安装座椅背。
9.
A receptacle, especially one mounted in a wall, that is connected to a power supply and equipped with a socket for a plug.
电源插座与电源相接并装备有为插头而设的基座的电源插座，尤指安装在墙上的
10.
Reinstall the elbow into the base of the relief valve to hold the Air Gap Drain in place.
将弯头安装在安全阀的底座，将气隙排放装置固定住。
11.
Install the main unit to the in-dash location, and the connection box under the navigator's seat, etc.
把主机安装到仪表板上。并把连接盒安装到副驾驶座的下面。
12.
"Controllers may be supplied with painted steel floor mounting legs. For base mounting or stainless steel mounting legs, consult the Factory."
可提供配置涂漆钢地面安装支架的控制装置。如果需要底座安装或不锈钢安装支架,请工厂联系。
13.
The switches and power sockets for fume hoods shall be placed on the outside of the fume hood.
所有的开关和插座都需安装在通风柜外部。
14.
Installation Technologies of Preburied Prestressed Anchor Bolts of Wide Diameter Pin Roll Hinge Supports
预埋预应力锚栓的大直径销轴铰支座安装技术
15.
On the Methods of the Plane Adjustment of Fitting Frame Lathe Bed Base
框架式床身底座安装水平调整方法的探讨
16.
Supervision control point of laminated rubber bearing
板式橡胶支座施工安装的监理控制要点
17.
Existing Problems and Solutions of Plate Rubber Support Installation
桥梁板式橡胶支座安装存在的问题及解决方案
18.
skid-mounted pump unit
装在滑橇座上的泵装置