1.
Accurate control of compression through close tolerances of gasket groove and allowance for radial expansion.
通过密封环槽的精密公差和径向膨胀的修正来进行压缩的精确调整控制。
2.
Finite Element Analyse of the Distortion of Sealing Ring of Spiral Groove Gas Face Seals;
螺旋槽气体端面密封密封环变形有限元分析
3.
Remove the rubber grommet seal from the reservoir and discar
从储液槽中拆下橡皮套环密封并抛弃它。
4.
Performance Analysis of the Spiral Groove Floating Ring Seal Based on CFD Analysis
基于CFD方法的螺旋槽浮环密封性能分析
5.
Research on Distribution Law of Steady-state Temperature for the Rotating Ring of T-shape Groove Dry Gas Seal
T型槽干气密封动环稳态温度分布规律研究
6.
Performance Research on a Spiral-Groove Dry Gas Seal with an Inner Annular Groove
带内环槽的螺旋槽干式气体端面密封的性能研究
7.
An Improved Design on Seal Groove and Seal Ring of Spherical Plain Bearing
关节轴承密封槽及密封圈的设计改进
8.
For diving there's small sealed tank inside, the negative tank.
为了下潜，里边还有个密封小水槽―负槽。
9.
The washer reservoir, filler neck, grommet seal, and filler cap are each available for service.
清洗液体槽，填注口颈，套环密封垫和填注口盖可以各自维修。
10.
"Thus, piston rings must be used to provide the necessary seal. The rings are installed in grooves in the piston. Actually, there are two types of rings, compression rings and oil-control rings."
所以活塞环就用来提供必要的密封。活塞环装在活塞的凹槽中。事实上有两种活塞环,气环和油环。
11.
Numerical Simulation and Optimum Groove Geometric Parameters for Spiral Groove Dry Gas Seal;
螺旋槽干气密封数值模拟及其槽形参数优化
12.
The circular arc wiring duct also called it separates wiring duct /the insulation wiring duct /seal type wiring duct /arc the circular arc wiring duct /walk wiring duct.
圆弧线槽也称之为圆弧型隔线槽/绝缘线槽/密封式线槽/弧线槽/走地线槽。
13.
Technical Research on the T-Groove Dry Gas Seals of the Compressor;
压缩机用T型槽干气密封技术的研究
14.
Study on Fluid Hydrodynamic Mechanical Seals with Deep Circular Grooves;
圆弧深槽液体动压机械密封性能研究
15.
Analyzing and Measuring the Depth of Large sized Jar Sealing Groove;
大尺寸缸体密封槽深度的分析与测量
16.
Research on Performance of Dry Gas Seal with Single-row Bidirectional Spiral Grooves
单列双向螺旋槽干气密封的性能研究
17.
Research on the Sealants to be Used to Fill Cracks and Repair Potholes in Asphalt Roads
沥青路面裂缝填封和坑槽修补用密封胶的研制
18.
Optional mounting configurations (clamp, flange, plate) and tank sealing solutions (packed, mechanical, lip) are available upon request.
可提供多种安装结构（卡盘式，法兰式，板式）和槽罐密封形式（填料密封，机械密封，油密封）。