1.
The governor must have provision for adjusting speed( generator frequency) and speed droop( no load to full load).
调速器必须具备转速调整（电机频率）降速降调整（负荷到满负荷）能。
2.
The governor must have provision for adjusting speed (generator frequency) and speed droop (no load to full load).
调速器必须具备转速调整（发电机频率）和降速降调整（零负荷到满负荷）功能。
3.
Stepless speed regulator regulates speed synchronously,with fast speed regulation and high production efficiency.
无级调速电机调速。整机同步运转。即有提速快、生产率高等特点。
4.
Then use the same screw to adjust for a smooth transition from idle to full throttle.
然后使用低速油针调整从怠速到全速引擎都能平顺运转。
5.
EPS: Electronic Power Steering - enables the amount of assistance with steering to be varied depending on speed and how much you turn the wheel.
电子助力转向-使转向助力的大小能根据速度和转向幅度调整。
6.
base speed of an adjustable-speed motor
调速电动机额定转速
7.
differential adjusting wrench
分速分速器轴承调整扳手;分速器轴承调整扳手
8.
The rotating speed is adjusted to be93,110 and124 rpm by means of changing pulley which is very convenient and easy.
采用更换皮带轮的方法来调整每分钟93转、10转、24转的转速，更换方便。
9.
Accelerate orderly transferring of the surplus labor forces and exploit the personal resource;
加速农村剩余劳动力的有序转移，调整完善人力资源开发利用政策;
10.
Study on Scale Factor Adjusting and Error Compensation for Rotating Accelerometer Gravity Gradiometer
旋转加速度计重力梯度仪标度因子调整方法及误差补偿研究
11.
Using MATLAB assistance to determine regulator parameter of the double closed-loop system of rotational speed and electric current;
应用MATLAB辅助整定转速、电流双闭环系统调节器参数
12.
quick spindle adjustment
(钻床) 快速主轴调整
13.
minimum adjustable table speed
工作台最小调整速度
14.
engine idling speed adjusting screw
发动机怠速调整螺丝
15.
Improper adjustment of differential bearings.
差速器轴承调整错误。
16.
slack adjuster worm plunger
减速调整器蜗杆柱塞
17.
The job of the timing belt is to turn the camshaft(s) at exactly 1/2 the speed of the crankshaft while maintaining a precise alignment.
正时皮带的工作是:当保持精准定位时调整凸轮轴的运转速度为曲轴速度的一半.
18.
A well-adjusted engine will have a stable idle and will not surge up and down after the throttle is closed.
一个完美的调整引擎将有稳定的怠速,收油门转速会上上下下都是不正确的。