1.
Remove the mounting nut/washer assemblies and remove the column.
拆下转向柱装配螺母/垫圈总成，并拆下转向柱。
2.
Double Nuts Anti-loosening link Assembly Screwing down Process Theoretic Analysis
双螺母防松时螺栓联接装配拧紧工艺的初步理论分析
3.
Install adjuster nut and lock nut.
安装调节器螺母和防松螺母。
4.
Install column onto the mounting studs.
安装转向柱至装配螺椿。
5.
hand-held electric nut setter
电动螺母安装器,手提式
6.
mounting of propeller by hydraulic jack
螺旋桨液压无键装配
7.
IGNITION SWITCH MOUNTING SCREWS (3)
点火开关装配螺钉（3）
8.
A small block of metal or wood with a central, threaded hole that is designed to fit around and secure a bolt or screw.
螺母，螺帽中部有螺纹用于与螺栓或螺钉相配合的小块金属或木头
9.
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
10.
power-operated nut-setter, non-electric, hand-held
机动螺母安装器,非电动、手提式
11.
Tighten locknut 1 to fix the thread stand.
拧紧固定螺母1不让线架装置松动。
12.
Install relief valve cover nut and tighten.
安装安全阀阀盖螺母，并加以紧固。
13.
Place the new pump in position and tighten mounting bolts.
使水泵就位，拧紧装配螺栓。
14.
Research on Assembly Key Technology of Flexible Gyro Joints;
挠性陀螺柔性器件装配关键技术研究
15.
Force Analysis of Chord Bolts of Type-321 Assembled Steel Bridge
“321”装配式公路钢桥弦杆螺栓受力分析
16.
The valve outlet sealing area is also flat. The nut fits on the nipple so the shoulder of the nipple rests on the pushing surface of the nut.
阀门排气口密封区域也是平的。螺母配合在管接口上，因而管接口靠在螺母的螺纹正面。
17.
Heat resistant tools ,burners ,household appliances ,Kitchenware, sink covers,building exteriors, bolts ,nuts ,CD bars,meshes.
耐热炉具、火炉、家电部件、2类餐具、水漕、装饰、螺钉螺母。
18.
Hsieh Yu butterfly valve is designed for installation with square screw, nut and washer.
协羽的蝶阀安装设计是使用方形螺丝，螺母及华司所组成。