1.
When in place, the gasket should not extend beyond the end of the pipe( Fig.3).
为了如图1所示正确定位法兰，应该首先紧固两个锁定螺栓。
2.
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
3.
Engine Cylinder Head Bolt Tightening Sequence
引擎汽缸头螺栓锁紧顺序
4.
The relief valve cover shall be secured with stainless steel bolts and shall utilize a quarter-turn locking joint to capture the spring load of the relief valve.
安全阀阀盖应该采用不锈钢螺栓紧固，应该采用四分之一转锁定连接来所定安全阀的弹簧负载。
5.
square collar-head set-bolt
方头凸缘端紧定螺栓
6.
Rear Mount To Body Bolts
后固定座与车身螺栓
7.
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓
8.
Remove caliper mounting bolts .
拆卸夹制器固定螺栓。
9.
Design and Biomechanical Study of Adjustable Self-locking Post-screw Used in Tibial Fixation for Anterior Cruciate Ligament Reconstruction
交叉韧带断裂重建固定胫骨端可调自锁式栓桩螺钉的设计与生物力学研究
10.
Fuel Pump Module Locknut
燃油泵模组锁定螺帽
11.
These nuts and bolts hold the wheels on.
这些螺帽和螺栓把轮子固定住了.
12.
Remove hinge retaining nuts from studs.
从双头螺栓拆下固定铰链的螺帽。
13.
These bolts and nuts hold the wheels on.
这些螺栓和螺帽把轮子固定下为。
14.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
15.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
16.
Simple: Compared to flange, its more light, the locking machine is designed handiness, the bolt quantity are few, does not need to holeblockage.
简易它比法兰轻、锁紧机械设计巧妙，螺栓数量少，无须对孔对锁。
17.
To Readjust- Loosen lock nut on the adjusting screw.
重新调节：松开调节螺丝上的锁定螺母。
18.
Fillet welded;Screwed and plugged;Quick release;Flanged and bolted;Flanged and bolted 2
角焊;旋拧插塞式;速释;带法兰以螺栓固定;带法兰以螺栓固定 2