1.
Position of Sensor Box can be raised or lowered 25 mm if in conflict with Handicap Grab Bars.
如果与人工操作杆产生冲突,那么感应器接线盒安装位置可以上下移动25毫米。
2.
Installation Kits/ Accessories include the necessary components to perform straight or tee splices, power connection boxes and water-resistant end seal terminations for final installation.
安装附件：安装附件/件包括伴热线安装时所用电源接线盒；两通、通及防水的尾端接线盒。
3.
Install the defogger relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
对准接线盒中有孔的继电器端子，安装除雾继电器，并把继电器插牢。
4.
Install the horn relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
安装喇叭继电器：将继电器端子与接线盒中的插孔对齐，插紧继电器。
5.
All the in stallation fittings are provided with the luminaire. Spare parts should be purchased. Connection box is selected by custom and declared in order.
灯具附安装形式所需的安装附件，备件需另订购，接线盒用户自选。请在订货时说明。
6.
Failure to properly position the electrical boxes to the plumbing rough-in will result in improper installation and impair product performance.
如果电源接线盒的安装位置不正确,将导致整个感应冲水阀的安装出现错误,影响今后的作业。
7.
"To ensure a perfect rough-in, Sloan recommends the use of the EL-485-a Flushometer Electrical Box Positioning and Support Kit."
为了保证安装顺利,美国思龙公司建议采用EL-485-a冲水阀接线盒定位与支撑组件。
8.
Install the headlamp or park lamp relay by aligning the relay terminals with the cavities in the junction block and pushing the relay firmly into place.
安装头灯或停车灯继电器，须将继电器端子对正接线盒中的插孔插紧。
9.
cross-junction box
交叉接线盒，交叉接线箱
10.
The engine should be mounted on a motor box that will in turn mount to the fuselage.
引擎应该安装在引擎盒座上再跟机体连接。
11.
Bolt Mounting of Auto Fuse Box and Its Solid Coupling Structure
汽车熔断丝盒螺栓安装及其刚性连接结构
12.
Install the main unit to the in-dash location, and the connection box under the navigator's seat, etc.
把主机安装到仪表板上。并把连接盒安装到副驾驶座的下面。
13.
Terminal block connections - easy and safe wiring connections are made possible by factory installed terminal blocks.
端子接线盒---这种在工厂就配置好的端子接线盒,使得电源连接更加方便,更加安全。
14.
Approach on Explosion Protected Cable Sealing Joint for Flameproof Motor
隔爆型电动机接线盒防爆电缆密封接头引入装置问题探讨
15.
Power control Box supply stable voltage and current overload, over voltage protected.
整合电源控制盒提供稳定电压、电流保护、电压保护，线材安装以星状网路线路安装方式。
16.
Check printer is online, cables are secured and cartridge is installed.
检查打印机是否已联机，电缆连接是否牢固，墨盒是否已安装。
17.
There's a faulty connection in the fuse-box.
保险丝盒里接错了线.
18.
cable distribution box
电缆交接箱，电缆分线盒，电缆终端盒