说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 内部磨损
1.
The rear disc brake shoes have an anti-rattle spring attached to the rear of the outboard shoe and a wear indicator on the inboard shoe.
后碟制动蹄片有一个附着于蹄片外后部的消声器弹簧,和一个在蹄片内部磨损指示器。
2.
Numerical calculation of internal flow and wear analysis of pre-riser
预提升管内部流动的数值计算及磨损分析
3.
The paper reviews and analyzs the influence of some intrinsicfactors of metal matrix composites( MMCs) on the wear performances.
综述和分析了金属基复合材料内部因素对磨损性能的影响。
4.
If the washing machine tubs were chipped or damaged, then the abrasive damage to the cuff edge was greatly increased.
当洗衣机桶部破损时,袖口的磨损增大。
5.
The housing has hydraulically-actuated hinged sections front and rear which provide for easy access to the internals and the wear parts.
设备壳体的前部和后部设有铰接的液压开启部分,能提供方便到达内件和磨损件的位置。
6.
Open the door of the enclosure and inspect the internal components and wiring for any signs of frayed or loose wires or other visible damage.
打开外壳门,检查内部元件和线路是否有磨损的痕迹、线路是否松开,或其它可见的损坏。
7.
3. Open the door of the enclosure and inspect the internal components and wiring for any signs of frayed or loose wires or other visible damage.
3、打开外壳门,检查内部元件和线路是否有磨损的痕迹、线路是否松开,或其它可见的损坏。
8.
Research on the 3-D Two-Phase Turbulent Flow Field in the Chamber of Vertical Roller Mill
立式辊磨磨腔内部三维两相湍流分析
9.
Failure analysis of chute abrasion in scraper conveyor and anti-wear measures
刮板输送机中部槽磨损失效分析与抗磨措施
10.
The Research of Friction Wear of Internal Combustion Engine Bases on The Method of Heating Analysis of Ferrograms;
分析内燃机的磨损磨粒—利用铁谱加热法
11.
Friction and Wear Properties of KM-type Lubricating Oil Anti-wear Additive for Diesel Locomotive
内燃机车KM型抗磨添加剂的摩擦磨损性能研究
12.
Study on Departmental Coordination Problems in Runinperiod of the Large Department System
大部制磨合期部门内部协调问题探究
13.
The engine parts will wear down if not properly cared for.
"若未妥善照料,引擎的部分将会被磨损。 "
14.
he was in the forefront; he was at the head of the column.
钻杆的最前部都已经磨损了。
15.
Most of the paint has been scratched away by heavy wear.
由于磨损严重, 大部分油漆已剥落。
16.
The Research of Wear Condition of the Internal Combustion Engine Based on the Ferrography;
基于铁谱技术的内燃机磨损状态研究
17.
Inspect and replace worn or damaged parts as necessary.
检查并且更换需要更换的磨损或损坏的部件。
18.
Researches on the Wear and Erosion of Bore and Its Influence to Interior Ballistic Performance
内膛烧蚀磨损及其对内弹道性能影响的研究