1.
Remove intake manifold bolts.
拆下进气歧管螺栓。
2.
Remove the throttle body bolts and lift the throttle body off the intake manifolDiscard the throttle body gasket.
拆下节气阀体螺栓并举高节气阀体脱离进气歧管。扔掉节气阀体衬垫。
3.
Connect the exhaust pipe to the turbo down pipe manifolTighten the bolts to 25 N·m torque.
连接排气管道到涡轮下管道歧管。拧紧螺栓到25 N·m扭力。
4.
Remove the bolts and lift the pan off the manifolDiscard the gasket.
拆下螺栓并举高盘脱离歧管。扔掉衬垫。
5.
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
6.
Install the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
安装进气歧管（见单元11-排气系统和进气歧管）。
7.
Remove the intake manifold (refer to Group 11, Exhaust System and Intake Manifold).
拆下进气歧管（见单元11-排气系统和进气歧管）。
8.
Tighten exhaust manifold to cylinder head bolts.
紧固排气岐管汽缸头螺栓。
9.
The shark was threaded into a pipe "T" connection.
一个螺栓体被拧进一个“T”形管接头中。
10.
Install charge air cooler hose to intake manifol
安装充电空气冷却油管到进气歧管。
11.
manifold (intake and exhaust) for internal combustion, aircraft engines
歧管（进气和排气）,航空内燃机用
12.
Intake Air Sensor Location—Engine
进气歧管空气感知器—0L引擎
13.
INTAKE MANIFOLD AIR TEMPERATURE SENSOR—ENGINES
进气歧管空气温度感知器—引擎
14.
Install throttle body to intake manifol
安装节气阀体至进气歧管。
15.
Air leak between the turbocharger and the intake manifol
透平增压器和进气歧管之间空气泄漏。
16.
The Research on the Performance of Timed Manifold Injection Hydrogen-Fueled Engine;
进气歧管喷射式氢气发动机性能研究
17.
FAILURE ANALYSIS OF JOINTING BOLT OF GASIFIER QUENCHING RING AND IMPROVING MEASURES
气化炉激冷环连接螺栓失效分析及改进措施
18.
This vacuum, called intake-manifold vacuum, varies as the operating conditions change.
这个真空叫做进气歧管真空。这种进气歧管真空随运转情况而变化。