1.
Specification: direction of rotation of output shaft varies with that of input shaft.
说明：当输入轴旋转方向改变，输出轴相应改变。
2.
The handle inputs rotation upon the wheel, then transmitted to another shaft by the belt transmission mechanism.
加上皮带传动机构，手把输入旋转运动于转轮，用皮带传输转动另一个轴。
3.
In rotating, the shaft splashes oil up into the bearings.
当轴旋转的时候就把油溅入轴承。
4.
The handle inputs rotation upon the link rotated.
手把输入旋转运动于连杆，使杆子转动。
5.
conveyer screw shaft coupling
输送机螺旋轴联轴节
6.
When swinging transmission machine operation, the force constant rotation axis to make efforts before and axial rotation move backward.
当摇摆传动机械运行时，等速旋转入力轴使出力轴向前和向后旋动。
7.
To cause to turn around or as if around a central axis;revolve or rotate.
旋转使盘旋，使仿佛绕着一中心轴旋转；旋转，回旋
8.
A gearing device that causes the output drive shaft to rotate at a slower rate than the engine input shaft.
低档使输出传动轴转速慢于引擎输入轴的齿轮装置
9.
The rotational inertias of uniform rotational rigid surfaces about the around axis
均质旋转面绕旋转轴转动的转动惯量
10.
When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.
当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。
11.
The rotational angle of a ball around its rotational axis.
转轴角-----球旋转时转轴的水平角度。
12.
The part of a vertical shaft that turns in a bearing.
轴踵轴承中能旋转的垂直的轴
13.
An axis or shaft supporting a rotating part on a lathe.
柄轴，心轴支撑车床旋转部件的轴或杠
14.
Study on Intelligent Input System for Rotary Part Profile and Sampling Strategy Planning;
旋转工件轮廓智能输入系统及路径规划的研究
15.
To turn around or as if around a central axis;revolve or rotate.
旋转围绕或仿佛围绕一中心轴而转动；盘旋，旋转
16.
Research on Bending Rotation Test of Rotation Shaft in Point the Bit Rotary Steerable System
指向式旋转导向系统旋转轴弯曲旋转试验研究
17.
Create a Rotation Key on
创建Y轴的旋转关键帧
18.
Create a Rotation Key on Z
创建Z轴的旋转关键帧