1.
A line of punch positions parallel to the shorter edges of a punch card.
平行于穿孔卡短边的一行穿孔位置。
2.
tyre valve hole misalignment
轮胎气门嘴孔位置不正
3.
Talking about the Hole-site Correcting Technology in Drilled Pile Construction on Granite Plagioclase Strata
花岗岩斜岩地层钻孔桩施工孔位纠偏技术
4.
A. Position the bores according to the product. Drill φ 6 bores respectively with impact driller, after the center line for bolt bore is drawn in the appropriate position on the wall.
根据产品安装孔位，在墙面相应位置画出螺钉孔中心线后，用冲击钻分别钻φ6孔。
5.
the hole in a woodwind that is closed and opened with the thumb.
木管乐器上供拇指停放和活动的孔位。
6.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
7.
Point-to-point systems are suitable for hole-machining operations such as drilling, countersinking, counterboring, reaming,Boring, and tapping.
点位系统适用于钻孔、锪孔、扩孔、铰孔、镗孔、攻丝等孔加工。
8.
Confucius was a great thinker of the past.
孔子是一位伟大的先哲。
9.
Register punch: Precision punching device used in a punch register system.
定位打孔机:应用于打孔定位系统内的精密打孔机。
10.
Mark location of the holes for the opposite leg and drill three more holes.
标注出对面支柱的孔洞位置,并打钻出三个孔。
11.
Punching is done with a special punch-register device.
打孔是用一种专用的打孔定位装置进行的。
12.
Co-Phasing Error Study of the Sub-apertures' for Optical Sparse Aperture System
光学稀疏孔径成像系统子孔径位相误差研究
13.
A separation, an aperture, a fissure, or a short passage in an organ or a body part.
裂孔，孔器官或身体部位中的孔隙、隙缝、裂隙或通道
14.
Complications associated with pegging included peg hole drilled on an angle, drilling off center, drilled hole shallow, granuloma and infection, total complications occured in 22.2% in the review, most that are of a minor nature can be cured.
并发症有钻孔偏位、偏斜、孔浅、钻孔处慢性肉芽肿、感染等,发生率为22.2%.
15.
Observation on the position relation among supraorbital foramen,infraorbital foramen and anterior maxillary foramen of Chinese with 64-lamella CT
64层CT扫描观察国人眶上孔、眶下孔、颏孔的位置关系
16.
Observation on the positional relationship among supraorbital foramen,infraorbital foramen and anterior maxillary foramen of Chinese with 64-row CT
64层螺旋CT三维重建观察国人眶上孔、眶下孔、颏孔的位置关系
17.
Register pins: Pins which locate in holes made by a punch in a punch register system.
定位圆钉:应用于打孔定位系统内的圆钉，它套入由打孔机打出的孔洞。
18.
" Indexable hard metal (carbide) inserts with rounded corners, with cylindrical fixing hole"
GB/T2078-1987带圆孔的硬质合金可转位刀片