1.
Computer Aided Optimum Design of Die Bearing Length and Layout for Aluminium Profile Extrusion
铝型材挤压模工作带长度和模孔配置的优化设计
2.
Research on Pool Formation and Structure Configuring in Kongque River Region of Traim Basin;
塔里木盆地孔雀河地区成藏构造配置研究
3.
T&P relief valve opening - comes standard with special tapping on side of tank.
降温减压安全阀安装孔-作为标准配置,热水器侧面均有特制的安装孔。
4.
Centerline discharge pump casings are not acceptable. The pump casing shall have an integrally cast hand hole supplied with a hand hole cover.
中心线排放泵壳是不可接受的。泵壳上应该具有整体铸造的探孔,并配置探孔罩盖。
5.
Configure &Tools...
配置工具(&T)...
6.
40L with test lever and short thermostat for installation directly in available tank tappings.
40L型号安全阀配置测试杆和较短的温控器,用于直接安装在容器安装孔上。
7.
A second method is to furnish the surfaces with hinges and to use an exterior sector with drilled holes for each angle setting.
第二种方法是在翼面上装置铰链，用一个对不同安装角钻有不同孔的外部扇形件与之配合。
8.
multi-aperture pulse distributor
多孔磁心脉冲分配器
9.
Adapter, male-female. Male-male can be specified.
适配器，插头－插孔。可指定插头或插孔。
10.
Adapter, male-female. Right-click for male-male.
适配器，插头－插孔。右击指定插头－插孔。
11.
tyre valve hole misalignment
轮胎气门嘴孔位置不正
12.
To drive(a screw or bolt)into a countersink.
将钻或螺栓置入埋头孔
13.
perforated pipe sprinkler
多孔管喷水灭火装置
14.
punched card processing equipment
穿孔卡片数据处理装置
15.
A line of punch positions parallel to the shorter edges of a punch card.
平行于穿孔卡短边的一行穿孔位置。
16.
Deep Copy Configuration : Deep copies the configuration to another configuration.
深层复制配置:将配置深度复制到另一个配置。
17.
Project Configuration : the project configuration associated with the selected file configuration.
项目配置:与选定的文件配置关联的项目配置。
18.
allocation of resources
资源分配,资源配置