1.
Use a universal puller to separate the ball stud from the frame rail bracket.
用万能拉出器将圆头螺栓从车架横梁支架上拆下。
2.
The horizontal beam on a cross or gallows.
横梁十字架或绞架上的水平横梁
3.
Position plate bracket and install attaching bolts through vehicle rear crossmember.
定位板托架并穿过车辆后横梁安装附接螺栓。
4.
Optimal Design of Material Cutting and Forming Processes for Upper Cross Beam on Forklift Mast
叉车门架上横梁下料成形工艺的优化设计
5.
Equipment Disposition: The standard disposition is single raodway, special components such as double roadway girden frame, high resistance stress frame of triangular bridge type can be used.
器材配置：标准配置为单车道，可选配双车道横梁、抗剪架等专用构件。
6.
Raise vehicle at body rails.
在车体横梁处顶高车辆。
7.
Using paint or grease pencil, mark outline of crossmember on frame rails.
使用油漆或油性笔，将横梁的轮廓标记在车架轨道上。
8.
"The frame consists of two straight pressed-steel members, five cross members, the front axle, the rear axle and four wheels."
车架由两根冲压成形的钢制直梁、五个横梁、前桥、后桥和四个车轮组成
9.
A transverse structural member or framework used for strengthening a bridge or trestle.
排架用于加固桥梁或支架的横向构架或框架
10.
A horizontal or transverse beam, especially a structural member resting on two supports.
横梁，顶梁水平的或横向的梁，尤指架在两个支柱上的建筑构件
11.
Disconnect the track bar from the frame rail bracket.
从车架轨道支架断开车身横向减震杆。
12.
A support for a beam in the framework of a building.
柱，杆建筑物框架中横梁的支撑物
13.
One of the beams of a launching cradle supporting a ship's hull.
用于支撑船体的下水架上的一横梁
14.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
15.
Design in the Beam of Rack Based on AutoCAD Mechanical;
基于AutoCAD Mechanical的货架横梁设计
16.
To construct with such parallel horizontal beams.
为…架搁栅,为…装托梁用平行水平横梁来构筑
17.
A beam projecting outward from the bow of a ship and used as a support to lift the anchor.
锚架从船头伸出的作为提升锚的支架的横梁
18.
Install upper crossmember, refer to Group 23, Body Components.
安装上横梁，请参阅第23单元“车体组件”。