1.
bilateral rapier loom
双向剑杆式投纬织机
2.
bias filling, bias weft
纬斜,纬不正（织疵）
3.
picking: passing the weft thread, which traverses across the fabric, through the shed
引纬运动：将纬纱沿织物横向引过梭口。
4.
Beat - up, Warp and Fabric Control
打纬,经纱与织物的控制
5.
weft bobbins for shuttles
织布梭用纬纱绕线筒
6.
filling band in shade
纬色档（织疵强印染疵）
7.
diagonal displacement
对角线形纬斜(织物疵点)
8.
high speed narrow fabric needle loom
高速狭幅导纬针织带机
9.
To make(cloth)by interlacing the threads of the weft and the warp on a loom.
织在织布机上交织经线与纬线来织（布）
10.
The function of a filling stop motion is to stop the loom when filling is not present.
纬停机构的作用是在没有纬纱时使织机停车。
11.
Design and Study of Beat-up Mechanism and Weft Insertion Mechanism of High-powered Rapier Looms;
高性能剑杆织机打纬和引纬机构的设计与研究
12.
The Weaving Design and Production of End-and-end Grey Fabric;
异经/异纬白坯织物织造设计与生产
13.
2 x1 looms are mainly used for filling mixing to prevent filling bands, a horizontal stripe effect due to unevenness in the filling.
2×1梭箱织机主要用于混纬以防止纬档。纬档是由于纬纱条干不均匀而引起的横向条纹。
14.
On newer shuttleless looms, the filling stop motion is activated electronically and is capable of detecting broken or missing filling on every pick.
在较新式的无梭织机上,纬停机构是电子式的,能够对每纬进行断纬和缺纬的监测。
15.
The technique of inserting weft in a fluid jet achieves weft-insertion rated comparable with those achieved by the Sulzer weaving machine, but there are width limitations.
利用流体引纬时,织机的入纬率与苏尔寿片梭织机相近,但这种引纬方法在织物幅宽上受到限制。
16.
Usage: It is applied to hydraulic looms to stop operation in case of broken-weft.
用途：本探纬器用于喷水织机的断纬控制，在织机断纬时，控制织机停车。
17.
The horizontal threads that cross the warp in weaving;weft.
（织品的）纬纱在纺织品中穿过纵向线的水平纱线；纬纱
18.
A pattern in weaving made when filling threads are passed over two or more warp threads at a time.
浮纬花纹纹织的一种图案，由纬线一次穿过两条以上的经线而织成