1.
The Role of Fe in Copper-based P/M Friction Materials
铁在铜基粉末冶金摩擦材料中的作用
2.
Laser Surface Modification of Copper-based Powder Metallurgy Friction Materials;
Cu基粉末冶金摩擦材料激光表面改性研究
3.
Study of Compacting Processes for Powder Metallurgic Aluminium Bronze Matrix Frictional Materials
铝青铜基粉末冶金摩擦材料压制工艺研究
4.
Laser Surface Modification of Copper-Based Powder Metallurgy Friction Materials
铜基粉末冶金摩擦材料激光表面改性处理
5.
Advantage and defect of semi-metallic, none-asbestos polymer and powder metallurgy were discussed.
探讨半金属基摩擦材料、非石棉有机摩擦材料和粉末冶金摩擦材料的优缺点。
6.
Study of Copper-matrix Friction Materials by Powder Metallurgy and Its High Temperature Fatique Wear Properties and Dynamic Behaviors;
铜基粉末冶金摩擦材料研制及其高温疲劳磨损和冲击性能研究
7.
Graphite Content Effect on Mechanical Properties of Fe Based P/M Friction Material;
碳含量对铁基粉末冶金摩擦材料力学性能的影响
8.
Friction and Wear Characteristic of Laser Quenched Ferrous P/M Materials;
激光淬火铁基粉末冶金材料摩擦磨损性能研究
9.
The Friction and Wear Characteristic of Surface Hardened Ferrous P/M Materials;
表面强化铁基粉末冶金材料的摩擦磨损特性研究
10.
Preparation of Titanium Composites by Powder Metallurgy and Its Bioactivity and Tribology Research;
粉末冶金钛基复合材料的制备及其生物活性和摩擦学研究
11.
Analyses on microstructure and mechanical properties of friction welded joint of dissimilar powder metallurgy tungsten alloy between 93W and 98W
93W与98W粉末冶金材料摩擦焊接头性能及组织分析
12.
refractory metals made by powder metallurgy
粉末冶金难熔金属材料
13.
Tribology Performance of Copper Matrix with Graphite Self-lubricating Powder Metallurgy Materials with and without Current
有无电流条件下石墨自润滑铜基粉末冶金材料的摩擦磨损行为研究
14.
Analysis on Electrical Sliding Wear Morphology of Cu-base Powder Metallurgy
铜基粉末冶金载流摩擦磨损微观形貌分析
15.
The Study on Mechanism of Rear Earth Elements in Iron Based Powder Metallurgical Friction Material;
稀土在铁基粉末冶金摩阻材料中作用机理的研究
16.
Research on Arc Erosion Characteristics of Cu-base Powder Metallurgy/QCr0.5 Couples under Electric Current
铜基粉末冶金/铬青铜摩擦副载流摩擦磨损的电弧侵蚀特性研究
17.
Study on C_f-Al Composite Material Prepared by Powder Metallurgy Process
用粉末冶金法制备C_fAl复合材料研究
18.
Characteristics and Description： High purity, fine granularity, low oxygen content. Mainly used in powder metallurgy abrasives, sealed material and raw material of lubricant.
纯度高、度细、含量低。主要用于粉末冶金磨擦材料，密封材料及润滑剂的原料等。