说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 1/4圆周边缘孔板
1.
quadrant-edge orifice plate
1/4圆周边缘孔板
2.
Analysis of a 4 Superharmonic Resonances of Edge-clamped Circular Plate Subjected to Transverse Excitation Load
周边夹紧圆板在横向激振力作用下的4倍超谐波共振分析
3.
It has rounded shoulders inside instead of the sharp orifice-like edge.
在内部作成圆形凸肩以代替锐缘孔板状的侧面。
4.
The edge of the curtain was beautifully pinked out.
窗帘的边缘被剪成漂亮的小圆孔做装饰。
5.
Solutions of circular elastic plates under axisymmetric edge conditions and their applications
弹性圆板在轴对称边缘条件下的解及其应用
6.
Study on Stability of Web with Circle Openings in Cold-Formed Thin-Wall Lipped Channel Beams
冷弯薄壁卷边槽钢梁开圆孔腹板稳定性能研究
7.
Turn under the raw edge of the bias strip 0.6cm (1/4 inch) and plain hem, picking up the machine stitches.
折0.6cm(1/4英寸)牵条毛边,用包缝缘边针法,挑起机缝线迹。
8.
The boundary line of a circle.
圆周一个圆的边界线
9.
Circumference:The boundary line of a circle.
圆周:一个圆的边界线.
10.
The Plastic Limit Analysis of Circular Plates Under Edge Moments and Local Linear Load
在边缘弯矩和局部线性荷载共同作用下圆板的塑性极限分析
11.
The Stress and Displacement of the Dangerous Field on the the Tube-plate and the Edge of Man-hole and the Tube-plate Are Affected by the Supporting Bar
管板上危险处及人孔与管板周边应力、位移受拉撑杆件的影响
12.
A device to thicken edge of pre-punching hole on blank is also developed.
还研制了在板坯的预冲孔上增加边缘厚度用装置。
13.
Research on Formability of Aluminum Alloy Flanged Hole by EMF
基于磁脉冲技术的铝合金板材圆孔翻边工艺研究
14.
Numerical simulation on influence coefficient of lateral pressure on broken zone of circular aperture
侧压系数对圆孔周边松动区破坏模式影响的数值试验研究
15.
Round and square perforation plate screens-Thickness of 3 mm and above
GB/T10613-1989板厚≥3mm的圆孔和方孔筛板
16.
Reattach the left side panel. 1) Insert the left side panel tabs behind the edge of the front panel. 2) Swing the panel shut.
重新连上左面板。1)将左面板卡扣插上前面板边缘的后部。2) 转动该面板以将其关上。
17.
Study of marginal bone loss around implant and clinical evaluation about one year after immediate restoration
即刻修复1年后种植体周围边缘骨吸收的临床评价
18.
ANNEX 4 PLURILATERAL TRADE AGREEMENTS
附件4诸边贸易协定1