1.
The reason analysis of leakage at welding seam of reheater tube supports in 660MW unit
660MW机组再热器管间支撑焊缝泄漏原因分析
2.
Seat ring is seal welded to eliminate leak path.
阀座环通过密封焊接，消除泄漏通道。
3.
4 Ducts shall be suitably welded or sealed for leakage.
管路有合适的焊接和密封，来保证不泄漏。
4.
Summary on reason of aluminum alloy panel radiator by vacuum brazing leak out
铝合金板式换热器真空钎焊泄漏原因分析
5.
So constructed or contrived as to prevent leaks or leakage.
防漏的为防止裂缝或泄露而制作或设计的
6.
Seepage treatment for expansion joints at drainage ditch of unit 1 at Shazhou power plant
沙洲电厂1号机组排水沟伸缩缝泄漏处理
7.
The Triaxial Magnetic Flux Leakage Signal Analysis of Spiral Weld Roof Topping and Hi-Low Defects
螺旋焊缝噘嘴错边缺陷三轴漏磁信号分析
8.
The chink section of relative rest must be taken as the reference datum of shearing leakance direction.
剪切泄漏的方向应以缝隙中相对静止的断面为参照基准;
9.
Research on Apeture EMI for the Predication of Automotive EMC Based on Antenna Theory;
基于天线理论的轿车EMC预测中孔缝泄漏EMI问题的研究
10.
To make known(something private or secret.
泄露泄漏（秘密，隐私等）
11.
Cause Analysis and Quality Control of the Abjunction of the Tube Bundles and the Seepage of the Weld Seam of an Autoclave
压煮器管束脱落与焊缝渗漏的原因分析及质量控制
12.
electrical leakage resistance
抗电气泄漏,漏电阻抗
13.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
14.
Inert gas protect welding is used, special glue is applied for the second sealing to ensure no leakage.
使用惰性气体保护焊接，并灌注专用胶进行二次密封，确保电池无泄漏。
15.
DC seam welder-"C"France Type.
直流缝焊机,"C"型。
16.
INSPECTION FOR REAR SEAL AREA LEAKS
后密封区的泄漏检查
17.
Something that escapes by leaking.
通过泄漏逃逸的东西
18.
alarm for motor-vehicle tyre breaking
汽车轮胎泄漏报警器