1.
Both single and double fillet welds shall be as follows unless otherwise shown on the drawing.
除非图上另外标明，所有单、双面贴角焊缝高度如下。
2.
Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.
指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。
3.
The Temperature Control System in HF Spiral Pipe Mill
高频螺旋焊管焊缝温度的闭环控制系统
4.
The Modelling of Temperature Control by Speed in HF Welding Pipe Process and its Temperature Control System
高频直缝焊管焊接速度控温建模及控温系统
5.
Drag onto the page to add concave, convex, or flush welds. Increase height to fit above other weld shapes.
拖到绘图页后，可以添加凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接形状。
6.
A Solution of the Temperature Field With One-D imens ion in t he Heat ing Zone for t he ERW P ipe
高频直缝焊管加热区温度场的一维解析
7.
Initiation Mechanics of Fatigue Crack at Weld Joint of High Strength Bridge Steel
高强度桥梁钢焊缝疲劳裂纹萌生机理的研究
8.
Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures
高温后正面角焊缝抗拉剪切强度的试验
9.
Regression and Analysis on Metal Strength of Welding Seam of Welding Core Wine
药芯焊丝焊缝金属强度的回归与分析
10.
Study of Length Calculation of Three Side Welded Lap;
三面围焊搭接角焊缝长度计算的探讨
11.
Research on the Mechanism of Undercut Formation and High Speed Welding Technology
焊缝咬边形成机理及高速焊工艺研究
12.
Use Magnetic-field to Improvethe Appearance of Weld of TIGWelding at a High Speed;
利用磁场改善TIG高速焊的焊缝成形
13.
Application of the electrogas welding for the blast furnace jacket
气电立焊在高炉炉壳立缝焊接的应用
14.
Amendment to the Weld Reinforcement Measurement of SAW Pipe with General Welding Measurement Ruler
通用焊接检验尺测量埋弧焊管焊缝余高的修正
15.
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
16.
Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding
搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究
17.
"High strength steels may result in increased thickness, however, the resulting joint is strong, smooth and recoilable. "
高强度钢可能更厚些,但是,焊缝是强固的,平滑的,可重卷的。
18.
"Where thickness characteristics at the joint are more important than strength, a thinner welder is possible at reduced joint strength. "
如果焊缝的厚度比强度更重要,则在降低强度条件下可使焊缝更