1.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
2.
Design of Nut Collars Sort System Based on Machine Vision
基于机器视觉的螺母垫圈分拣系统设计
3.
" Plain washers for bolts,screws and nuts--General plan"
GB/T5286-1985螺栓、螺钉和螺母用平垫圈总方案
4.
Tab washers for round nut
GB/T858-1988圆螺母用止动垫圈
5.
Remove the mounting nut/washer assemblies and remove the column.
拆下转向柱装配螺母/垫圈总成，并拆下转向柱。
6.
Stainless steel stuffing box hardware is standard (ie. bolts, gland studs, nuts, washers).
标准的金属密封不锈钢填料箱（如螺栓、填料压盖螺栓、螺母、垫圈）。
7.
" Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures"
GB/T1231-1991钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件
8.
A gasketed connection has four parts: the valve outlet, a nipple, a nut, and a gasket (or washer).
一个衬垫接头有四个零件：一个阀门排气口、一个管接口、一个螺母和一个衬垫（或垫圈）。
9.
Gather the necessary installation tools: you will need a column cutter, column nuts, ferrules, a magnifying loop, and typewriter correction fluid.
收集必要的安装工具：柱切割器、柱螺母、垫圈、放大镜、打字机改正液。
10.
" Hexagon head bolt, single coil spring lock washer and plain washer assemblies"
"GB/T9074.17-1988六角头螺栓,弹簧垫圈和平垫圈组合件"
11.
Remove bolts, nuts and washers attaching manifold to cylinder hea
拆下系附在汽缸头的螺栓，螺帽和垫圈。
12.
"attach each leg to the bottom of the enclosure using the three nuts, bolts, and washers provided for each leg."
将每个支柱联结到外壳底部,对于每个支柱,采用三套螺母、螺栓和垫圈与外壳进行连接。
13.
Big washer for tapping screw assembly
GB/T9074.30-1988自攻螺钉组合件用大垫圈
14.
Hexagon head bolt and plain washer assemblies
GB/T9074.14-1988六角头螺栓和平垫圈组合件
15.
Hexagon head bolt and single coil spring lock washer assemblies
GB/T9074.15-1988六角头螺栓和弹簧垫圈组合件
16.
Small washer for tapping screw assembly
GB/T9074.29-1988自攻螺钉组合件用平垫圈
17.
Install Sleeve SP-3194-B, Washer SP-534, and Nut SP-319
安装套筒SP-3194-B、垫圈SP-534和螺帽SP-3193。
18.
Remove vibration damper bolt and washer from end of crankshaft.
从曲轴端拆下减震器螺栓和垫圈。