1.
shock absorber relief valve gasket
减震器保险阀垫密片
2.
water pump outlet valve flange gasket
水泵出口阀法兰垫片
3.
Seat Face: Negates need for flange gaskets.
阀座表面:不需要使用阀兰垫圈。
4.
To reverse the seat disc, unscrew the disc screw and disassemble the disc washer and disc rubber from the disc holder assembly.
为了翻转阀座阀瓣，则要拧松阀瓣螺丝，从阀瓣固定器总成拆解阀瓣垫圈和阀瓣橡胶。
5.
A DISS connection is a gasketed type that consists of the valve outlet, nut, nipple, and gasket.
DISS接头是一种衬垫型接头，由阀门排气口、母、接口和衬垫组成。
6.
Temperature limitations of body/ bonnet materials, trim, bolting, packing and gaskets must all be considered.
阀体/盖材料，阀内件，填料和垫圈的温度范围都必须考虑。
7.
The mattress should be stored flat and with the valve open until it is to be packed for a trip.
气垫储存的时候要放平，阀门打开，知道充气完毕。
8.
The end of the va|ve is double-metal stopping shims of high efficiency.
阀门底端采用双金属止推垫片，止推性能优良。
9.
Study on Adjust Shim Thickness and Affection to Throttle Opening Velocity of Hydro-pneumatic Spring
油气弹簧调整垫片厚度及对开阀速度影响
10.
A gasketed connection has four parts: the valve outlet, a nipple, a nut, and a gasket (or washer).
一个衬垫接头有四个零件：一个阀门排气口、一个管接口、一个螺母和一个衬垫（或垫圈）。
11.
Remove the throttle body bolts and lift the throttle body off the intake manifolDiscard the throttle body gasket.
拆下节气阀体螺栓并举高节气阀体脱离进气歧管。扔掉节气阀体衬垫。
12.
Apply silicon sealer/lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end.
将硅密封/润滑剂施加在法兰组件垫圈的内径和外径上，将垫圈压在阀体端口上。
13.
And keep your Therm-a-Rest mattress away from your pets! Puppies love to chew the valve, and cats like to sharpen their claws on these mats.
让你的宠物离你的气垫远点，狗狗们喜欢咬阀门，猫喜欢在这些垫子上磨爪子。
14.
Inflate the Therm-a-Rest mattress by mouth as hard as possible, then quickly close the valve.
用嘴吹气垫使之尽可能膨胀到最坚硬,然后立即关闭阀门.
15.
The circular male and female bonnet joint is self-aligning and encapsulates the gasket.
圆形外螺纹和内螺纹阀盖连接是自行对准调整并且封装的垫圈。
16.
alloy Iron Valve are furnished with TFE Braided packing and Reinforced Graphite gaskets.
合金铸铁阀门配置TFE纤维填料和强化石墨密封垫。
17.
When in place, the gasket will be seated and flush with the valve body ends.
放置好后，垫圈将与阀体连接端口一起固定和冲洗。
18.
Manufacturer and sales of Silicone Valve Cover Gaskets for the aviation, automotive and motorcycle community.
为航空、车与摩托车行业制造与销售硅树脂阀套垫圈。