1.
Studies on Fermentation Tin's Heating and Heat Preservation in the Poultry and Domestic Dejectas Digestion with High Temperature Anaerobic Dry Fermentation;
畜禽粪便高温厌氧干发酵罐加热保温研究
2.
The Analysis and Research for the 72000DWT Crude Oil Tanker Heating and Insulation Process Operation System
72000吨油轮货油加热保温操作系统开发研究
3.
The Structure Design and Engineering Practice of Bitumen Transport Hoses by Using HTF to Heat and Insulate
利用导热油加热保温沥青输送软管的结构设计和工程实践
4.
Once the water is heated, it is kept hot with material called insulation.
水加热后就会通过绝热材料来保温，
5.
They have good performance of temperature keeping, can be used in micro-wave oven.
保温性能好，适用微波炉加热，用途广。
6.
Remove the access door(s), insulation and element cover(s).
拆卸观察门，绝缘保温层和加热元件盖。
7.
Hardness was decreased after maximum by high temperature heating.
高温加热硬度达最大硬度以后保温硬度降低。
8.
The mixture was then heated to 75 DEG C and held at this temperature for I hour.
混合物加热至75℃,并在该温度保温1小时。
9.
Experimental Investigation of Thermophysical Properties of Insulation Material and the Characteristics of Typical Disfigurements on Furnace Liner;
加热炉保温材料热物性及特征缺陷的实验研究
10.
Study on Heat Transfer Mechanism of Heating and Heat Preservation Processes in Oil Tanker;
油轮货油加热和保温过程传热机理研究
11.
"The furnace is horizontal, which is characterized by fast starting, low heat inertia, good isolation and high heating efficiency."
还原炉是卧式布置。炉子加热启动快,热惯性小,保温效果好,热效率高。
12.
Fold the insulation outward and away from the heater element( s).
将加热元件外部的绝缘保温层拆卸下来。
13.
Heat the mixture to 55 deg C (131 deg F) and maintain for the whole reaction.
加热混合物至55度，并在反应中保持这一温度。
14.
The Research of Cargo Oil s Heating Process and Heat Preservation Process for Oil Tanker on the Basis of FLUENT;
基于FLUENT平台的油轮货油加热和保温过程的研究
15.
Comparative Teaching Method on Heat Transfer of Heat Preserver and Rib outside Cylinder Wall;
圆筒壁外加设肋片以及保温层传热的比较教学
16.
On the Application and Popularization of Heat Insulation System on Residential Outer Walls;
加快推广住宅外墙外保温隔热体系的应用
17.
The application of the Aerated concrete block in wall insulation works
加气混凝土砌块在墙体保温隔热工程中的应用
18.
Characteristic: Water-jacket heating mode. Temperature is even in the working chamber. if power failure, the chamber can keep constant temperature for longer.
特点:隔水式加热方式,温度均匀且断电后仍能保持较长时间恒温.