1.
skin ausrolling
表面加热轧制形变热处理
2.
Study and Application of Surface PTC Heater s Thermal Resistance;
表面型PTC加热器热阻的研究和应用
3.
The scale was developed on the surface of the heat exchanger in evaporator.
蒸发器的热交换机表面的尺码加大了。
4.
Simulation of Thermoelectricity Field in Slag Pool Heated by Electroslag on Roller Surface Based on ANSYS
基于ANSYS轧辊表面电渣加热渣池热电场模拟研究
5.
CONVEX-CONCAVE SHAPE:Unique designed of convex-concave shape,which can strengthen and expand the heated measure.Promote to absorb the light and heat energy. Increase the radiating energy.
在省油器表面形成许多凹凸面：使表面受热面积加大，促进吸收光能及热能，增加红外线放射能量。
6.
Comparing Properties of Activated Carbon Prepared by Microwave Heating Method with Those Prepared by Conventional Heating Method
微波加热与传统加热制备高比表面活性炭的对比研究
7.
Additionally, the heating plate is coated with heat-resistant and anti-corrosion coatings.
另外，加热板表面涂有耐高温防腐蚀的涂层。
8.
Measuring method for the surface temperature distribution of infrared heater
GB/T7287.2-1987红外辐射加热器表面温度分布测量方法
9.
The Study of Induction Period of Fouling of Calcium Carbonate on Heated Copper Bas Surfaces
碳酸钙在加热铜基表面结垢诱导期实验研究
10.
The brine is then pumped to the surface and heated until the water evaporates.
海水被抽到表面然后被加热直到水蒸发。
11.
EFFECT OF HEAT TREATMENT ON SURFACE QUALITY OF DIAMOND TOOL TURNED OFHC(UT2)
热处理对无氧铜超精加工表面质量的影响
12.
Progresses of machining process for the surface structure of enhanced heat transfer tubes
强化传热管表面结构及加工工艺研究进展
13.
Modeling and Analysis of the Influence of Heating Parameters on Surface Temperature Signals
加热参数对表面温度信号的影响的建模与分析
14.
After the cubes are heated to pasteurize their surfaces, Actinimucor Elegans and other Mucor species are added.
小块经加热对表面进行巴氏杀菌后,加入Actinimucor Elegans和其它毛霉
15.
Research of Electric Hot Machining to Improve Surface Quality;
利用导电加热切削改善已加工表面质量的研究(英文)
16.
A partly enclosed, directly heated surface from which warm air circulates by convection.
对流式加热机一个部分被封闭，暖空气在其直接加热的表面上通过对流进行循环的装置
17.
Water Cooling or optional oil heating/ cooling of the Rolls where the water or oil flows in spiral channels near the roll surface which gives an extremely efficient cooling/ heating of the rolls and the compound being milled.
水冷却或油加热/冷却方式，是通过贴近辊表面的螺旋型流道来实现的，保证强力的加热冷却效果。
18.
The corrosion problem is less in regenerative plants since the heating surface is provided by stones.
在蓄冷器工厂中，因为加热表面是石头提供的，所以腐蚀问题较少。