1.
FRACTURE ANALYSIS AND RESEARCH ON EXTRACTIVE CONTROL VALVE STEM OF INDUSTRIAL TURBINE
工业汽轮机抽汽调节阀杆振动断裂原因分析及探讨
2.
This causes uneven regulation and excessive stem wear.
这将导致调节不均匀和阀杆磨损过度。
3.
Straight moving type relief valves, mainly valve disc, valve body,, spring-loaded, roof, regulation pole, conditioning nut, and other integral parts.
直动型溢流阀，主要有阀芯、阀体、弹簧、上盖、调节杆、调节螺母等零件组成。
4.
Cause Analysis for Governing Valve Level Fall-off in 600MW Steam Turbine
国产600MW汽轮机调节汽门阀杆脱落原因分析
5.
pressure controlled valve
压力调节阀压力控制阀
6.
a pedal that controls the throttle valve.
控制节流阀流量的杠杆。
7.
Disc, the trim part of butterfly valves, rotates with the stem to open/close and modulate the valve.
蝶阀是随阀杆一起转动的蝶板作启闭件，用以实现阀门的开启，关闭与调节。
8.
To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.
要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。
9.
back pressure regulator
背压调节器吸入压力调节阀蒸发压力调节阀
10.
Smooth operation of throttle linkage and throttle body air valve.
节流连杆和节流体空气阀的平稳操作。
11.
spring-loaded regulator
弹簧型自力式调节阀
12.
Pneumatic valves regulate the pneumatic enforcement agencies and regulatory valves two.
气动调节阀由气动执行机构和调节阀两部组成。
13.
Inferential Reasoning on the Mathematical Model of Value Plug of Control Value
调节阀柱塞型阀芯形面数学模型推导
14.
Globe pattern stop-check valves can be used in horizontal piperuns with the stem straight up.
截止阀类型的节流止回阀可以用在水平管道上，阀杆垂直向上。
15.
A lever or pedal controlling such a valve.
节流杠控制这种阀的杠杆或踏板
16.
Gland– two-piece gland/ gland flange is self-aligning to eliminate stem damage from cocked gland.
(8) 压盖-两件式压盖/盖法兰，自行对准调节，防止由于压盖翘起而造成阀杆损坏。
17.
Crane cast steel swing check valves can be furnished with outside lever and adjustable weight when so ordered.
如果用户需要，美国克雷恩旋启式止回阀可以配置外置杠杆和调节压铁。
18.
To regulate the speed of(an engine)with a throttle.
节流用节流阀调整（发动机）的速度