说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 端点控制
1.
USB2.0 Endpoints Controller in 180nm CMOS Process
采用180nm CMOS工艺的USB2.0端点控制器(英文)
2.
A Solution of Information Security for Enterprise Intranet Endpoint Access Control Policies Base on Symantec Sygate Enterprise Protection (SEP)
基于Symantec SEP的企业网接入端点控制信息安全解决方案
3.
Optimized Design of USB Device Controller Endpoint Buffer Regional
USB设备控制器端点缓冲区的优化设计
4.
Line that can have an arrowhead appear at either or both ends. Use the control handle to resize line ends.
一端或两端带有箭头的直线。使用控制手柄可调整端点形状的大小。
5.
Line that can have a dot appear at either end, or both ends. Use the control handle to resize line ends.
一端或两端带有点的直线。使用控制手柄可调整线端大小。
6.
Line with a dot on one end and an arrowhead on the other. Use the control handle to resize line ends.
一端是点,另一端是箭头的直线。使用控制手柄可调整线端的大小。
7.
Curved line with an arrowhead at either end. Use the control handle to resize the line ends.
两端都带有箭头的曲线。使用控制手柄可调整端点形状的大小。
8.
Duality for Multiobjective Control Problems with Endpoint Constraints
有端点约束的多目标控制问题的对偶性(英文)
9.
A single two-dimensional Bezier spline is defined by four points- two end points and two control points.
一条单独的二维贝塞尔曲线由四个点定义——两个端点和两个控制点。
10.
The control points act as" magnets" to pull the curve away from the straight line between the two end points.
控制点承担“磁铁”的角色,它把曲线拉离两个端点之间的直线。
11.
Use to add a dimension to an arc or circle. Place endpoint at arc center, control handle on arc.
用于向弧或圆添加尺寸。将端点放在弧中心上、控制手柄放在弧线上。
12.
MC provides the control function of multipoint communication and selects the communication mode.
MC提供多点通信的控制功能,确定终端间的通信模式。
13.
The coupling capacitors can couple a control signal to the corresponding internal terminal, i.e., the output terminal of the differential circuit.
耦合电容可以耦合控制个至对应的内部端点上,亦即差动电路部份的输出端上。
14.
console terminal character output
控制台终端字符输出
15.
console terminal character input
控制台终端字符输入
16.
mass storage control twin port
海量存储控制器双端口
17.
console terminal handler
控制台终端处理程序
18.
communication terminal module controller
通信终端模块控制器