1.
Position switch into license plate lamp housing and connect switch harness connector.
定位开关到牌照灯壳，连接开关线束接头。
2.
Three-position switch (120 deg. step). Contact positions can be specified.
位置开关（120 度间距）。可指定触点位置。
3.
To release from a closed or fastened position.
打开从关闭的或固定的位置上移开
4.
Set the TAPE/OSC switch to the correct position.
将TAPE/OSC开关设定于正确的位置
5.
Solenoid Switch Valve Latched in TCC Position
电磁螺线管开关阀门固定在ＴＣＣ位置
6.
Quick location for switchgear failure caused by battery defect
蓄电池故障引发开关故障的快速定位
7.
Open reduction and internal fixation for the treatment of Lisfranc's joint injuries
切开复位内固定治疗Lisfranc关节损伤
8.
Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box,Positioner and so on.
NAMUR标准指示器便于安装位置开关、定位器等附件。
9.
Open reduction and internal fixation for displaced intra-articular calcaneal fractures
切开复位内固定治疗移位的跟骨关节内骨折
10.
Represents a double-pole, double-throw switch. Right, left, and open positions can be specified.
表示双刀双掷开关。可指定右、左和断开位置。
11.
Represents a double-pole, double-throw switch. Right-click for right, left, and open positions.
表示双刀双掷开关。右击指定右、左和断开位置。
12.
Represents a double-pole, single-throw switch. Right-click for open and closed positions.
表示双刀单掷开关。右击指定断开或闭合位置。
13.
Represents a double-pole, single-throw switch. Open and closed positions can be specified.
表示双刀单掷开关。可指定断开和闭合位置。
14.
Limit switch, directly actuated, spring returned, normally closed. Switch can be specified as open or closed.
直接启动、弹簧复位、正常闭合的限制开关。可指定开关为断开或闭合。
15.
Represents a single-pole, double-throw switch. Right-click for up, down, and center positions.
表示单刀双掷开关。右击可指定开关位置居上、居下和居中间。
16.
Represents a single-pole, double-throw switch. Up, down, and center positions can be specified.
表示单刀双掷开关。可指定上、下和中间位置。
17.
The valve may be padlocked in full open or full closed position.
可以把阀门锁定在完全开启或完全关闭的位置。
18.
Research on Switching Optimization and Fault Location of Distribution Networks;
配电网开关优化配置与故障定位的研究