1.
"This allows interchangeability of gear operators, actuators, and adapter bushings from valve mounting flange to extension stem top flange."
因此,蜗轮操作装置、驱动装置和衬套接头可以从阀门安装法兰上替换到阀杆延长件顶部法兰上。
2.
Analysis on Process Factor of End Jump Being Slightly Larger When Fixing Flange Diameter on Servo Motor
伺服电机安装法兰全跳动误差偏大的工艺因素分析
3.
Easily installed, with gasket, between standard class 125 flanges.
安装容易，带垫圈，位于标准125磅级法兰之间。
4.
FLANGED:There are several steps to follow to make sure that a flanged joint will be properly assembled.
法兰连接:为了确保正确进行阀兰连接安装,需要遵循如下几个步骤。
5.
The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt.
本阀可水平或垂直安装，安装时两法兰连接中间必须加密封垫片，然后均匀锁紧螺栓。
6.
Press the gasket firmly into the flange cavity ensuring that the sealing lip is pointed outward.
将邻近的法兰或管道定位到美国瓦茨法兰适配器上，安装剩下的螺栓。
7.
Be sure to always install regulator with the arrows under the diaphragm flange pointing in the direction of flow.
确保安装调节阀时，始终保持隔膜法兰下的箭头指向流体流向。
8.
Turn the locking bolt so that it is fixed on the bake cover or the flange plate.
安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。
9.
Turn the hollow bolt so that it is fixed on the bake cover or the flange plate.
安装后必须旋出空心螺栓锁紧在电机后端盖或法兰盘上。
10.
Quick: Don't need to weld and galvanize, the setting time is 3 times quicker than the flange connect fitting.
快速不需焊接和再镀锌，安装速度比法兰连接管件快3倍以上。
11.
Assure both mounting base of gear operator (3) and valve top flange (6) are clean and dry.
确保齿轮操作机构(3)和阀门顶部法兰(6)的安装基座清洁并且干燥。
12.
Actuator mounting dimensions for flanged ball valves, see pages 77-84.
用于法兰球阀的执行机构安装尺寸，请参阅第77-84页。
13.
Add sealed shim between the two flanges and then lock down the bolt.
安装时两法兰间需加密封垫片，然后均匀拧紧螺栓。
14.
The Client Setup files could not be installed. The service was installed successfully.
无法安装客户端安装文件。服务已成功安装。
15.
Wafer-style held in place between two pipe flanges. Easy to install but cannot be used as isolation valve.
平板式(对夹式):固定在两个管道法兰之间。安装容易,但是不能作为隔断阀使用。
16.
Type of“ FS” valves: Specification is3/4-11/2 ins. Special design on flange-inlet and spray-tube-slip. Installation and maintenance is convenient.
阀：规格有3/-11/英寸，特有的法兰进口、吹管滑入等设计，方便安装和维修。
17.
A butterfly isolation valve cannot be installed directly to the valve inlet flange, as the disc will contact the orifice plate.
蝶阀隔离阀不能够直接安装在阀门进口法兰上，因为其阀瓣将会接触到节流板。
18.
Modular units for machine tool construction--Tenon drive and flanges for mounting multi-spindle heads--Dimensions
GB/T3668.13-1983组合机床通用部件安装多轴箱用的法兰盘和端面传动键尺寸