1.
Method of testing in toughness of wood
GB/T1940-1991木材冲击韧性试验方法
2.
Test method for impact toughness of high performance ceramics
GB/T14389-1993工程陶瓷冲击韧性试验方法
3.
Test method for impact toughness of ceramic floor tiles
GB/T2584-1981陶瓷地砖冲击韧性试验方法
4.
Test method of impact toughness of cemented carbides at room temperature
GB/T1817-1995硬质合金常温冲击韧性试验方法
5.
The Study on the Impact Toughness Test of the Thick Steel Plate SA387Gr11CL2 Welded Joint
厚壁钢板SA387Gr11CL2焊接接头冲击韧性试验研究
6.
Test method for the charpy impact resistance of glass fiber-reinforced plastics
GB/T1451-1983玻璃纤维增强塑料简支梁式冲击韧性试验方法
7.
Research on the Impact Tester in Cryogenic Vacuum & Low Gravity;
低温真空及低重力环境下冲击韧性试验装置研究
8.
Analysis of the Impact Toughness Test and Fracture of Rail Thermit Welding Joints at Low Temperature
低温下铁路钢轨铝热焊缝接头冲击韧性试验与断口分析
9.
Technological Test for Improving the Impact Toughness of Quenched and Tempered Steel Forgings
提高调质钢锻件冲击韧性的工艺试验
10.
A Charpy test is usually much less expensive to perform than a fracture toughness characterization experiment.
夏比（冲击）试验通常要比断裂韧性试验的费用低得多。
11.
notch ductile steel
耐冲击钢, 韧性钢
12.
impact spray test
冲击喷射式渗透性试验
13.
The fracture of K1 c and impact specimens were observed by SEM.
通过扫描电镜观察了断裂韧性和冲击试样断口。
14.
Charpy V-notch toughness
夏比v型缺口冲击韧性
15.
Meanwhile the optimal welding parameter which was suitable for welding line impact toughness was gained by analysis on the test result of impact toughness and microstructure.
通过对冲击韧性的测试结果与微观组织的分析,确定出使焊缝冲击韧性最佳的焊接工艺参数。
16.
Plastics--Determination of impact properties by use of small specimens
GB/T16420-1996塑料冲击性能小试样试验方法
17.
Analysis on experimental results of rock burst tendency of different coal samples
不同煤试样冲击倾向性试验结果分析
18.
test method for brittleness temperature of plastics and elastomers by impact
塑料及弹性体冲击脆化温度试验方法